Every Mac with a Mini DisplayPort allows you to connect an external display or projector using an adapter. You can use an external display as your main workspace or to extend your desktop, or you can work in mirrored mode with a projector so you can view what your audience sees.
Use the Mini DisplayPort to DVI Adapter to connect an advanced digital monitor, such as the 20- or 23-inch Apple Cinema Display, that includes a DVI connector. Review the documentation or check with the manufacturer of your monitor to make sure you're choosing the right adapter.
- Mini DisplayPort
- Compatible only with Mac computers with Mini DisplayPort
Ratings & Reviews
DVI-D Single Link (Digital only, 1920x1200@60Hz)
This is the Mini-DisplayPort to DVI-D single-link adapter.
DVI-D single-link means that ONLY DIGITAL signals will be output, wi This is the Mini-DisplayPort to DVI-D single-link adapter.
DVI-D single-link means that ONLY DIGITAL signals will be output, with the maximum supported resolution at 60Hz being 1920x1200 (2.75 megapixels to be exact).
The adapter easily plugs into the Mini-DisplayPort jack of new aluminum unibody Macbooks and Macbook Pros, and the other end is female DVI-D. Be aware that you cannot physically fit your DVI-I cables into the DVI-D female end. However, since all 24 pins are open, DVI-D dual-link cables can physically fit just as well as DVI-D single-link cables, and can be used to carry the SINGLE-LINK signal to your TV or monitor.
I was surprised how light-weight this adapter is; a plus for carrying around. I was worried that the relatively heavier cables would pull the plug out from the notebook, but the adapter fits quite snugly in the Macbook Pro. The two screws on the DVI cable I used could not reach their holes in the adapter (female end is not deep enough), however, it was not a concern since the cable still fit tightly into the adapter.
So, if you dont have a DIGITAL display larger than 1920x1200, this adapter will be fine. Since HDTV is 1920x1080 this adapter is good enough for me. If you are looking to drive larger digital displays, get the dual-link adapter instead. Also, remember that analog is not supported with this adapter. …
- Written by Vernon T from North York
2289 of 2455 people found this useful
DVI drops Analog signal, DVI-D only
We know the Mini DisplayPort can output an analog signal because there's a Mini DisplayPort to VGA adapter. So why does this adapt We know the Mini DisplayPort can output an analog signal because there's a Mini DisplayPort to VGA adapter. So why does this adapter drop the analog signal and go strictly to DVI-D (Digital only) instead of DVI-I (analog & digital)? The old MacBook Pro's had DVI-I. So this adapter is not a replacement to what used to come standard on MacBook Pros! I'm left very frustrated. …
- Written by David J from Gray
1838 of 2217 people found this useful
Be sure of your pinouts
This is a DVI-D (single-link) connector - look up DVI on Wikipedia, if you're not sure of the difference. You can NOT simply conn This is a DVI-D (single-link) connector - look up DVI on Wikipedia, if you're not sure of the difference. You can NOT simply connect to a DVI-I connector, like Apple's own DVI-VGA adapter, because of the extra pins in DVI-I.
With the correct cabling, it seems to work just fine. …
- Written by Aaron M from Salamanca
1311 of 1478 people found this useful
On to our 4th in less than 1 year
Beautiful product, but having to replace them every 3 months due to failure. At $49.95 a piece, the cost is starting to rack up.
- Written by Hayden R from Auckland
Good, but not recommended for use with Wacom Cintiq 21UX.
Ordered this item so I can connect a Wacom Cintiq 21UX to my 27" iMac. It works, but the Cintiq would show streaks and blinking p Ordered this item so I can connect a Wacom Cintiq 21UX to my 27" iMac. It works, but the Cintiq would show streaks and blinking pixels. It would get worse especially after waking up from sleep. I got in touch with Wacom and they said that they know about this issue and will not recommend this adapter for use with Wacom Cintiqs. Rather, use Kanex iAdapt DVI adapter instead. I have that one and it works perfectly. …
- Written by Rodolfo Rey M. S from Airdrie
I've bought one of these and I'm pretty disappointed. I use it to connect a 2010 15" MacBookPro (8.2) to an ASUS PB278Q. Very ofte I've bought one of these and I'm pretty disappointed. I use it to connect a 2010 15" MacBookPro (8.2) to an ASUS PB278Q. Very often when I turn on the computer, the image in the monitor is completely grained (full of noise) and I can see the desktop below the noise. I need to unplug the USB part of the adapter (the power I suppose) and then re-plug it. Sometimes I need to do this twice. It may also work turn off and on the monitor. One thing is for sure: When I turn on the computer, or awake it from sleep, it's completely impossible to know whether the noise/grain will appear. Sometimes it does, sometimes it doesn't. I regret a LOT having bought this, specially because later I learned that I could simlpy have bought a cheap Mini Displayport to Displayport cable........ …
- Written by Antonio B from London
1 of 1 people found this useful
Questions & Answers
Answers from the community
I found through Apple support that Macbooks made before 2010 do not support sound using the hdmi min I found through Apple support that Macbooks made before 2010 do not support sound using the hdmi mini port adapter. You must use a vga cable to the headphone jack in addition to the mini hdmi adapter to hear sound through your media center. This solution does work for us. …
- Answered by Eileene T from Honeoye Falls
- Feb 13, 2011
where is the mini display port on my MacBook Pro
- Asked by William M
- Mar 10, 2011
If you have a newer Macbook Pro, the mini display port is actually the Thunderbolt port. You can plu If you have a newer Macbook Pro, the mini display port is actually the Thunderbolt port. You can plug any mini display port connector into the Thunderbolt port. …
- Answered by Jason S from Waverley
- Jun 20, 2011
how to connect Mini DisplayPort to DVI Adapter to 27 inch cinema display
- Asked by Edwin C from Philadelphia
- Jul 21, 2013
No answers yet
Does the mini-display adapter work with the new thunderbolt Macs?
- Asked by John Mark A from Palo Alto
- May 12, 2011
Yes Thunderbolt port can do a display and a fast transfer from a hardrive to your laptop
- Answered by Carole S from Arnold
- Jul 18, 2011
This has the proper pins for DVI-D Dual-Link. Will this work with a 2048x1152 display?
- Asked by Robert M from Glen Ridge
- Dec 15, 2009
This is a single link adaptor. The connector is female, and has holes to allow you to connect a dual This is a single link adaptor. The connector is female, and has holes to allow you to connect a dual link cable so that you don't have to buy a single link cable. With single link (165 MHz pixel clock), you could get 2048x1152 at 63 Hz. Your monitor may or may not support that. …
- Answered by Joe V from Fort Langley
- May 7, 2013
what max resolution it supports? is it just up to 1080p?
- Asked by Lukasz L
- Nov 4, 2012