Home

Power Support Anti-Glare Film Set for iPod touch

GREAT.!

Written by DM from New Lenox

Feb 24, 2008

This is the best film set ever that apple has came out with...I have been through 3 ipods and the ipod touch is by far the most sensitve and fragile...In my world I always need a case, but this time I placed the film set on, and no air bubbles...but if u dont take ur time u will get air bubbles, so everyone else who thinks this is a bad product because there is air bubbles its not always true it depends on if u whoop it on , or smoothly place it on the sensitive glass...

DEFINITLY WORTH IT IF U WANT TO PREVENT SCRATCHES!

9 of 10 people found this useful

Power Support Anti-Glare Film Set for iPod touch

good,but...

Written by MS from san antonio

Feb 21, 2008

Nice film that serves it's, but the back does not cover completely...

16 of 24 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Looks good!

Written by MB from Greenlawn

Feb 21, 2008

This case is great and does exactly what is says it does. I had no problems applying to the ipod touch. In my opinion it isn't nescesary to get another case around it but you can if you want even more protection for the sides. great product

16 of 21 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Great Product

Written by KF from Slidell

Feb 20, 2008

I bought this to go with a rubber case for my Touch and it is great. The frosted screen does not reduce clarity at all, and it makes finger prints and smudge marks less visible. Applying it was very easy. The actual film peels off of the plastic like a sticker, so the easiest way to apply it is to put it on the iPod as you peel it off of the plastic. This also reduces the air bubbles. And since it is not an adhesive, you can peel it right back off without damaging the iPod. I am very pleased with it. Great product.

24 of 26 people found this useful

Power Support Anti-Glare Film Set for iPod touch

A must for first line protection

Written by DB from Calgary

Feb 20, 2008

These are two of the most expensive pieces of plastic that I have ever purchased but they are absolutely worth it. For my previous iPod I tried the Agent 18 product and it was good in functionality but the case scratched too easily and the two halves added quite a heft to the unit. I couldn't see going back to Agent 18 when the enjoyment of the touch depends so much on visibility.

These pieces are all but invisible. As with all plastic films application is a pain and you will get air bubbles if you don't take your time. All of my bubbles except for one very minor one are on the back. The film goes on differently onto metal than it does on glass. If you perfect the back application first you will have absolutely no trouble applying the film perfectly to the front glass. For the glass application just make sure the surface is entirely free of dust. I didn't remove the factory film until I was ready to apply this protective film so dust was not an issue.

For my second line of defense I bought a SENA leather pouch. Very cool and the iTouch fits like a glove. The two together barring some physical catastrophe should keep my iTouch in perfect condition for a long time.

In the end almost 10% of the iTouch purchase price went into protection.

5 of 5 people found this useful

Power Support Anti-Glare Film Set for iPod touch

This would have been great, BUT...

Written by KB from Nutley

Feb 17, 2008

This probably qould have been a good product. When I applied it the first time, I got a ton of air bubbles, and it wan't allined perfectly with the iPod- so I took it off and tried again. This time there was even more air bubbles and it got all dirty and dusty. Also, it ruins the quality of the screen; images distorted and grainy, probably from the dust and oil. I don't know if the crystal is better- probably isn't. All I do know is that I'm into a lot of trouble with this this case. If you had a completely immaculate space and "magic fingers" to apply this product, and if you are able to do it once, perfectly, this would be great.

16 of 30 people found this useful

Power Support Anti-Glare Film Set for iPod touch

IDEAL with ...

Written by RK from San Francisco

Feb 16, 2008

This product is great if you use it in tandem with an iSkin touch silicone case. It covers the entire front face of the iPod and the iSkin seals the film firmly in place with no openings for separation and dust. The iSkin comes with a film that only fits over the screen of the iPod so it separates at the edges and allows dust onto the glass screen on the edges. It also is very difficult to apply. The Power Support film applied very easily if you line up the film from the bottom and gently stroke your way up. I needed a couple attempts but found that it was easy to reapply. Now the cost of the iSkin is $29.99 so add that to the Power Support film and you come up with a $44.94 case plus shipping and/or tax. However, the iSkin is superb case that fits like a glove and protects your investment. So it's worthwhile to get both. A drawback is that you end up with the back film that can't be used as effectively on the front if you wanted to replace the original front one.

14 of 21 people found this useful

Power Support Anti-Glare Film Set for iPod touch

I love this product

Written by MF from apo

Feb 16, 2008

As a stand-alone case, in my opinion this isn't a good choice, but if you use it in combination with another case it works wonders! The screen protector really is anti-glare, as ait says, and it seems to make my screen more sensitive to touch. In addition, it gives the screen a great feel, no longer does it feel like I'm rubbing my finger across a window when I use my iPod Touch. I really recommend this to every iPod Touch users.

15 of 18 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Decent

Written by JH from Fort Macleod

Feb 15, 2008

Pros

Easy to apply
Cant even tell it's on

Cons
Colours look a bit off/grainy, like a less extreme version of when you turned on your touch with both plastic layers on out of the box

3 of 13 people found this useful

Power Support Anti-Glare Film Set for iPod touch

read!!!!!

Written by SD from Rochester

Feb 15, 2008

so the best thing to do is what to take of the film that comes on the ipod when u get it cuz less smudges and stuff, then put on the anti glare film, but it took me sometime to get it on cuz it have so little air bubbles and i needed to get them out, it was cuz of dust on the anti glare thing so to get the dust on the anti glare film is to use packing tape(clear selifan or whatever) and pat it with the tap to remove the the dust on the film, then now its looks really good!!! great product!

2 of 20 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Great at first....

Written by AP from San Antonio

Feb 15, 2008

This product is a great product if you are going to put your ipod inside another case. However as a stand alone protectant, this product leaves a lot to be desired. The films arent sticky enough to stay put. I have only had mine on my ipod touch for about 3 weeks and back is already curling and peeling on the edges.

20 of 23 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Great!!...... for some

Written by JW from Enterprise

Feb 14, 2008

This is a great product. However, if you have pets it would be worth it to take your ipod somewhere other than your house to apply the film. The smallest piece of lint or hair under it will make a bubble.

9 of 13 people found this useful

Power Support Anti-Glare Film Set for iPod touch

This is Bad

Written by RB from Ashton

Feb 14, 2008

I would not reccomend getting this. With only being out in the open for like 2 seconds, The sticky side got covered with dust. That and there are air bubbles. I do not reccomend getting thhe i clear. I would get a case

14 of 27 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Impossible To Put On

Written by JW from Old Tappan

Feb 9, 2008

This took so many tries to get properly on and it was dirty so i had to clean it. I still haven't been able to get all the air bubbles out after two days of trying. But, it protects the screen great and the anti glare works. Apple needs to come out with an easy to put on screen protector minus the air bubbles.

20 of 42 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Must Have

Written by MM from toronto

Feb 8, 2008

This product is amazing! Was almost afraid to use the Itouch in fear that I would do irrepairable damage to the screen - this works perfectly! The image is crystal clear and I have no worries about damage or marks. I've only applied to the front and use the Agent18 hard case for the back. I read in advance of applying the film that there were problems with air bubbles etc.,so I just found the most meticulous person I know to do it for me and avoided any frustration.

32 of 45 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Very pleased

Written by GG from Deltona

Feb 7, 2008

I'm very pleased with this because it protects the front of the IPOD Touch from scratches and dust. It was extremely easy to apply. I wish the back piece would cover the back entirely.

28 of 35 people found this useful

Power Support Anti-Glare Film Set for iPod touch

AWESOME

Written by SO from north hills

Feb 7, 2008

THIS THING RULES!!!!!!!!!!!!!!!!!!!!! NO SMUDGES NOT SCRATCHES, NO GLARE, NO BULKY CASE. GET IT!!!!!!!!!!!!!!!!!!

22 of 33 people found this useful

Power Support Anti-Glare Film Set for iPod touch

Works great with a little work...

Written by JD from Columbus

Feb 6, 2008

I knew I wanted protection for my new iPod Touch, but was hesitant to try it myself. I was going to ask someone at the Apple store where I got it and the iPod to put it on for me, but the store was packed, and I was lucky to get someone to help me check out. I took it home, and it wasn't too bad. The back was a little trickier than the front. It is less rigid than the front, and thus more prone to bubbles. I had to try a couple times, but finally got it. I used a credit card to smooth it out. I ended up with a bubble at the bottom of the back side, but it doesn't really matter since I've got it in an Agent 18 hard plastic case. The front went on really easy. I just had to make sure that it was lined up right. I did all this right after opening up the box for the iPod and taking off the protective cover it comes with, and I was careful not to let the covers touch anything or touch it anywhere except for the very edge. Very pleased with this product. I would have given it five stars if the back would have gone on easier, but not bad over all.

19 of 22 people found this useful