• 1.0 out of 5 stars

    Loose connection to rmbp 15

    • Written by from Quezon city

    flaky connection to rmbp 15" thunderbolt port. the adapter is too loose on the port so connection is on and off. bad product

  • 5.0 out of 5 stars

    Works great, looks great!

    • Written by from Wentzville

    I purchased the Apple Thunderbolt to FireWire Adapter to use with my mid-2013 MacBook Air in order to import miniDV tapes with a camcorder with a 4-conductor FireWire port. This adapter works just fine, no problems whatsoever. It is also very small, portable, and it looks a thousand times better than any other adapter on the market. I am very satisfied with this product.

  • 1.0 out of 5 stars

    Confirmed - Will Connect Only to TB on Computer

    • Written by from BELOEIL

    This adapter works only one direction. If you want to connect the Thunderbolt end to a hard drive and the 800 FireWire to another computer - IT WILL NOT WORK! Not Designed for this.

    2 of 4 people found this useful

  • 2.0 out of 5 stars

    Works...for now

    • Written by from Langley

    I struggled with using my FW portable drives on the new MacBook Pro. It was uneven, then stopped completely in the first week. Apple Store replaced the adapter and it's currently working on all my drives. Though the OWC Mercury RAID now needs external power, which it never did before--I can live with that as long as it works. I'm hoping I just had a bad adapter and now all is well. Fingers crossed.

  • 5.0 out of 5 stars

    Works

    • Written by from Seattle

    Late 2013 27" i7 iMac. The adapter does what it says. I'm running a 6 enclosure, 11 drive FW chain no problem. A bus powered drive works fine, but I'm plugging it in at the end of the chain, so it's drawing power from the other drives, not the iMac. The adapter does get warm when doing large transfers, not too hot, but still.

    It would nicer if iMac still had a native FW port, but I doubt Apple will ever add that back on.

    3 of 4 people found this useful

  • 1.0 out of 5 stars

    does. not. work.

    • Written by from Washington

    It would probably be a good idea when you invent new connections to have them actually work. I was trying to use FW800/Thunderbolt to connect my external drive to my NEW "fabulous" Mac Pro. Bull hockey.

    7 of 9 people found this useful

  • 5.0 out of 5 stars

    Powers canopus advc110 & Works flawlessly!

    • Written by from Bismarck

    I am using a Mid 2012 Macbook Pro Retina and the canopus advc110 to transfer VHS footage. The firewire cable sits in the thunderbolt adapter tightly without any movement and so does the thunderbolt connection in my macbook. I even tried to wiggle the connection and I had no problems. I give this 5 stars and recommend it to anyone!

  • 5.0 out of 5 stars

    It works for me

    • Written by from PEORIA

    I have a Panasonic Camcorder thats a few years old that uses a 4-oin fire wire to transfer video from the DV Tape to the Computer. I purchased a 4-pin to 9-pin Fire Wire cable, used this adapter with my 13" Retina and it not only saw my camera but transferred the video flawlessly. Pleasantly surprised.

    2 of 2 people found this useful

  • 1.0 out of 5 stars

    Freezes entire computer

    • Written by from West Hartford

    I just purchased this adaptor so I could use my LaCie 4Big Quadra with my new iMac 27". At first it appeared to work fine and then I started to edit some files on the drive which resulted in my computer freezing, something I haven't seen in a long time. I held the power button down to restart (my only option) and tried again, same result. So now my $1200 drive is reduced to USB 2, thank you Apple.

    10 of 11 people found this useful

  • 1.0 out of 5 stars

    Damaging my hard drives?

    • Written by from Madison

    This doesn’t work with either of my external AC-powered FireWire drives (3TB G-Drive and Century HDD box). The drives mount but soon after initiating a data transfer the drives freeze and go bonkers with horrible clicking noises. All drives are healthy, though, and work flawlessly with dedicated FireWire ports on our older Macs.

    4 of 4 people found this useful

  • 1.0 out of 5 stars

    bring back Firewire ports

    • Written by from Woodinville

    I just got a new iMac which didn't work with two of the USB audio interfaces that work fine with my other iMac. I don't want to believe that a new tricked out iMac is defective right out of the box, so so I bought a nice Firewire interface and two adapters to get from Firewire to Thunderbolt. Now I have three audio interfaces that all work intermittently. It is too bad that Apple is so far ahead of the market for peripherals (try finding a Thunderbolt, or even newer style Firewire audio Interface) that I now have to go buy another USB interface and look at a bunch of useless Thunderbolt ports on a new iMac. Maybe it is the Mac, but it sure might be data issues though the two converters I need to connect a normal audio interface to the new iMac.

    7 of 7 people found this useful

  • 1.0 out of 5 stars

    Doesn't work

    • Written by from North Royalton

    I purchased a Thunderbolt to Firewire adaptor for my late 2013 27" iMac. At first it worked, now it doesn't. I'm not positive, but it may have stopped working with Mavericks.

    7 of 7 people found this useful

  • 1.0 out of 5 stars

    FireWire + Thunderbolt + MBP = Frustrated

    • Written by from Philadelphia

    I bought this adapter/dongle along with my brand new early 2013 15" MBP. I have a OWC bus-powered RAID enclosure.

    The dongle itself works fine, and it supplies enough bus power to be used.

    My problem is, every time I move my laptop, even the slightest bit (say a slight adjustment to the screen), the drive is ejected because I guess there is a momentary disconnect with the dongle. I can't believe Apple would make something so short, stubby and stiff that is supposed to provide a connection to a FireWire device, especially with mobile-based laptops.

    Maybe Thunderbolt should utilize a plug design that isn't so susceptible to movement. I never had these problems with USB or FW400/800.

    Regardless, it's extremely frustrating, especially when working with data directly on the drive. I find my most recent workflow is to copy the file to the desktop, work on that, and copy it onto the drive when I'm done. This way there's no data corruption and Finder/the Application I'm in doesn't freak out.

    Bottom Line: For a Desktop, I'm sure it's wonderful, as you're less likely to move. I cannot recommend it for a mobile device.

    16 of 17 people found this useful

  • 1.0 out of 5 stars

    Does not work

    • Written by from Indianapolis

    I'm not sure under what circumstance this would work, but I bought a Western Digital external hard drive (AC-powered) and planned to use this adapter to connect to a Mac Pro... No luck.

    6 of 8 people found this useful

  • 2.0 out of 5 stars

    No Bus power for external interfaces or drives

    • Written by from New York

    Very disappointed with the fact that this adapter will not pass enough juice to power an external hard drive or audio interface. when I connect to a device thunderbolt to thunderbolt, it works fine (so the power is present at the jack) connect to a FW device with this interface cable and.... no dice.
    Lame.

    5 of 6 people found this useful

  • 1.0 out of 5 stars

    Does not work on my iMac

    • Written by from Miami

    I'm trying to connect a G-RAID Drive's Firewire 800 port to an iMac's Thunderbolt port
    I very disappointed It took a lot to bring this adapter to Caracas but it is not working properly.

    6 of 6 people found this useful

  • 2.0 out of 5 stars

    Doesn't work with my bus powered drive

    • Written by from Houston

    I have an old Seagate firewire 800 portable drive that I use to move data around different computers. This cable doesn't work on that drive and it is a huge pain. If I even plug the drive in my new MacBook Pro freezes up and I have to hard boot it. It has worked ok on other drives that provide their own power.

    6 of 6 people found this useful

  • 1.0 out of 5 stars

    Not enough power for portable FW800 drives

    • Written by from Los Angeles

    I have had to switch away from Firewire 800 drives due to lack of power on the Thunderbolt bus. The majority of my bus powered drives will not spin up on the 15" Retina. Disappointed as this was my primary mode of transport and had invested thousands of dollars over the years. Now switching to USB3 and reinvesting in a more ubiquitous standard.

    Feels like pro users have been abandoned on Thunderbolt.

    11 of 12 people found this useful

  • 1.0 out of 5 stars

    Just stopped work for the 2nd time

    • Written by from MADRID

    I bought a macbook pro retina 15", on 2012 September and with it I ordered this adapter. It worked with my Iomega and lacie external hard drives till 2012 november. Took both, my mac mbpr, this adapter and the hard drives to the apple store in Madrid, where I live. They changed it after some tests.

    From 2012 Nov to 2013 Sep I just used the new one sporadically and it worked fine till last week, when it just refused to bring my drives up. Both drives work fine on my old mbp (2007) with built in firewire 800.

    It's by far not the kind of performance/quality I was expecting for a set that cost me 2370.00 euros. Feel like throwing out 30 euros on the trash for this clumsy adapter.

    be warned.

    8 of 8 people found this useful

  • 1.0 out of 5 stars

    Not enough power for anything

    • Written by from Stockholm

    Edirol FA-66 needs more power. Worked great over old Firewire, but it seems the 7w isn't enough. I guess Firewire 400 gave 10-20 watts. So now I need to get down to the basement and dig up the power supple. More cables in 2013 than in 2007 - Apple, you s*** again.

    16 of 17 people found this useful