• 4.0 out of 5 stars

    Gets Gigabit speeds, but raises ping.

    • Written by from Metairie

    Works as advertised, capable of 1000mb up and down. Only problem is it significantly raises ping. Verified that a friends computer on the same cat6 cable can get 6 ping, yet mine is much higher at 28. While still pretty good, losing 22 ping is pretty significant.

    1 of 1 people found this useful

  • 5.0 out of 5 stars

    Recommended

    • Written by from Dunedin

    Put this to use upon its arrival, and installed my OS without a hitch. No complaints

  • 5.0 out of 5 stars

    Awesome Adapter for amazing speed!

    • Written by from Tustin

    I think this is an amazing adapter, gives you the speed you want, and takes advantage of your WiFi capabilities on your Mac, love it. PS, it also bends to be at the right angle for the cable!!

    1 of 1 people found this useful

  • 1.0 out of 5 stars

    Appalling

    • Written by from Newmarket

    I've replaced this once already and my second one in 6 months has now crapped out. Premium price point for a terrible and unreliable product. Furthermore, as others have noted, this does not work well in Boot Camp as you have to reboot after the computer goes to sleep to regain functionality.

    6 of 7 people found this useful

  • 2.0 out of 5 stars

    Expensive and lack of Apple quality

    • Written by from Seattle

    When I first got the product, it worked great. It was fast, easy to use. The only issue I had with it was the stiffness of it. Later on, after about 1 month of use, the adapter stop working altogether. not sure what do to now.... $30 adapter RIP

    Honestly I think it is better just to get a wireless router.

    1 of 2 people found this useful

  • 1.0 out of 5 stars

    'Garbage' & 'Junk' Come to Mind

    • Written by from Austin

    As many others have noted, this ethernet adapter is full of unpleasantries:
    -Cable far too stiff, causing dropped connections if bumped
    -Adapter runs far too warm
    -Does not hot-plug in Boot Camp Windows. This wouldn't be a major issue except that it drops connections often, so you can't just hot-swap-resume.
    -When plugged in, Boot Camp Windows will not wake from hibernate.
    -Occasional kernel panics when hot swapping in Mavericks
    -Does not work on 1st Gen Thunderbolt Macs (in my case, on a first gen thunderbolt MBA)
    -When plugged in, noticeably reduces battery life

    It seems odd that Apple - who pioneered hot-swap with the Bondi iMac way back in 1997 - would release a half-baked ethernet adapter, particularly since those users who might need it the most are corporate entities, which predominantly use Windows. There's nothing portable about a huge dongle hanging out the side of a sleek MBA.

    0 stars. Pure garbage. Try again, Apple.

    8 of 8 people found this useful

  • 1.0 out of 5 stars

    Don'y buy for use with Boot Camp and Windows!!!

    • Written by from Sunnyvale

    You must have the adapter plugged in before booting Windows for it to work.

    4 of 10 people found this useful

  • 1.0 out of 5 stars

    Lasted for 48 hours

    • Written by from Cheltenham

    Lasted for 48 hours. Spent hours rebooting/reconfiguring network. Multiple restarts etc. etc. etc. The last thing I thought the problem would be was the Apple adaptor that I purchased 2 days previously. WOW! What has happened to Apple? Appalling!

    Why ditch the ethernet port in the first place?

    14 of 21 people found this useful

  • 2.0 out of 5 stars

    Crashes daily

    • Written by from PALO ALTO

    I have a relatively new Macbook Pro running Mavericks. When I arrive at work and plug in my ethernet adapter, my MacBook crashes. It happens probably 7 times out of 10. I have two other colleagues with MacBooks, and the exact same thing happens to them. They have stopped using the adapter as a result. The kernel panic log refers to ethernet code, but there is no solution on the internet and no firmware update that I know of.

    15 of 15 people found this useful

  • 2.0 out of 5 stars

    Hangs my Air

    • Written by from Bethel

    Any change in the configuration of the network causes all applications to hang and finder to become non responsive. All updates have been applied.

    7 of 7 people found this useful

  • 5.0 out of 5 stars

    Excellent quality device

    • Written by from Maplewood

    This meets and or exceeds expectation...I mean it's an TB-Ethernet. What could go wrong? A helpful little thing would be to add a MAC Address Barcode or actual address itself to the package. That way we can scan them into our Learn/Trust database so when we deploy them, our users are not knocked off the network. We have to remove from the package, plug it in to a MBP or iMac to get the MAC and then send to the NOC for them to add manually. All other Mac equipment arrives with the Ethernet, Bluetooth, Airport/WiFI, FireWire etc., MAC Addresses on the outside of the boxes. Why not this?

    2 of 3 people found this useful

  • 2.0 out of 5 stars

    Crashes my laptop

    • Written by from Princeton

    I have to be careful when and into which Thunderbolt port I plug this into or it will cause a kernel panic on my mid-2012 MBPR. I assume this is caused by a bad driver or firmware. I've gotten it down to happening every other week or so. Other than that, it works great! =/

    4 of 4 people found this useful

  • 1.0 out of 5 stars

    Save your money

    • Written by from Flushing

    I bought this shortly after they came out but just got around to running an ethernet cable to my desk in mid February. I was happy to have a wired connection to my Air finally but today I noticed a marked decrease in performance. After logging out, then restarting with no improvement, I checked the network to find I was on Airport. The Preference Pane said the cable was unplugged, but it wasn't. The adapter was significantly warm to the touch and unplugging and plugging it back in did not help. System Profile could see it but it just quit working, giving me a very short useable life; less than two months.

    19 of 21 people found this useful

  • 3.0 out of 5 stars

    Draws more power than Wi-Fi

    • Written by from Pentool

    I bought this adapter for my new, late 2013 MacBook Pro. The adapter itself work great. However, I purchased it thinking it will draw less power than Wi-Fi does, so I save on battery power. NOT TRUE! Turns out, this little think draws more power than using Wi-Fi. I had not anticipated this and so I didn't search on this before I purchased it. But it turns out, other also complain that it draws more power than Wi-Fi.

    So if you plan to use the adapter while the laptop is running off the charger, then it's great. But when running off just the battery, it's better if you stick to Wi-Fi, if you have a good connection. I will be returning the adapter.

    8 of 8 people found this useful

  • 5.0 out of 5 stars

    Easy set-up

    • Written by from OSWEGO

    Just plug in the ethernet cable into this adapter and the adapter into the thunderbolt port and you are done!
    The Mac Book Pro Retina laptop just silently added it in the background. I went into my system to check to be sure it added it and it was there.
    No pop-up and easy to use.
    I am very satisfied as I always am with Apple products and service.

    4 of 5 people found this useful

  • 1.0 out of 5 stars

    Doesn't Last

    • Written by from Smiths Station

    Worked great at first with no issues and then after about 2 months it became unreliable. If my internet cable was moved at all it would disconnect. Now it doesn't work at all. The port also gets very hot.

    29 of 29 people found this useful

  • 5.0 out of 5 stars

    Great for migrating data from one Mac to another

    • Written by from Menlo Park

    This adapter is extremely useful when migrating to a new Retina MacBook Pro if you don't have 802.11ac wireless. It allowed me to transfer files at roughly 800 Mb/s, compared with roughly 50-80 Mb/s over wi-fi.

    1 of 3 people found this useful

  • 5.0 out of 5 stars

    Its easy. It works. Nothing to complain about

    • Written by from San Jose

    I just got a MacBook Pro and found out that it didn't have an ethernet port, so bad on the MacBook. However this review is for the Thunderbolt to Gigabit Ethernet Adapter and the adapter works great. I plug the ethernet cable to the adapter and the adapter to the MacBook and thats it. Took less than 10 seconds and it works. Just needed to switch the internet source from wifi to ethernet.

    5 of 6 people found this useful

  • 5.0 out of 5 stars

    Thunderbolt to Gigabit Ethernet Adapter

    • Written by from Oehningen

    I had always problems with wifi when abroad in Hotels etc.. This Adapter solved my problem just perfectly. MBP 13" late 2013.

    4 of 5 people found this useful

  • 1.0 out of 5 stars

    Useless in windows, Good in OSX

    • Written by from Casselberry

    Without native plug and play support for windows this adapter is useless. It runs fine when using windows in a VM but i prefer to boot to windows as my primary OS when performing tasks that require heavy CPU. Very disappointing... If I could do everything i need to do in OSX it would serve me well, but sadly a large number of tasks are easier to accomplish in windows.

    There is a workaround to get functionality in windows but the adapter stops functioning when the computer is placed in sleep mode. After resuming you are required to reboot in order to get a functioning adapter again.

    28 of 37 people found this useful