• 3.0 out of 5 stars

    Not for SDXC cards 64 GB

    • Written by from Long Beach

    The kit works very well for 32 gb cards, but does not work at all for 64 gb cards.

    67 of 69 people found this useful

  • 5.0 out of 5 stars

    Works seamlessly

    • Written by from Surrey

    I have a Nikon D600 and a Nikon V1.. I shoot RAW with a wide selection of cards. Lexar Pro, Sandisk, Panasonic with varied sizes and speeds. I have an iPad 2 and iPad mini which I plan to use to save my images on while travelling and then upload to my iMac when I get home.

    After reading all the bad reviews I was having seconds thoughts about this product. As a long term Apple junkie I had to give it a try. Well, I used every card I have in each camera with both the card reader and USB connector and it worked just as smooth as silk and all images loaded on to the iPad 2 without any problems.

    My next concern was would the RAW images transfer from the iPad to the IMac intact or would they convert to jpeg. The RAW transferred over without issue and I am happily editing.

    I liked this product so much that I bought the connector for the IPad mini the next day.

    Apple has never let me down on any product and I have them all. My only negative comment about Apple is .... What's going on with your stock price? We miss you Steve.

    36 of 38 people found this useful

  • 1.0 out of 5 stars

    It does not work!!!!

    • Written by from Тула

    Every time i try to connect a usb card or sd card to my IPad3 last iOS
    says the device is low on power! how to be and what to do?
    produce such horrible crafts branded apple

    Sorry for my english, im from Russuai

    34 of 50 people found this useful

  • 5.0 out of 5 stars

    Oh so ez

    • Written by from Visalia

    I've got two Nikon cameras, a DSL and a point and shoot. I simply attach the ipad connection kit to my ipad then remove the memory card from the camera and place it into the connection kit and woola! The pictures upload to my ipad. Yes that ez never had a problem, so I would recommend this item.

    11 of 13 people found this useful

  • 3.0 out of 5 stars

    Who to blame?

    • Written by from Friendswood

    Got a camera kit to read in files off my brand new Sony PJ380 camcorder. Works fine using USB connection and the internal 16 GB of flash. However, wanted to use my 64 Gbyte SDXC card. Sony did not like the format card was originally, so I reformatted in the camcorder. This changed the card to have a 64 gb ExFAT partion. Thereafter, neither the USB or SD card reader worked.Going to try multiple FAT partitions to see if I can get something to work.

    I figure Apple should support ExFAT on the iPad, but I suppose I could blame Sony...

    4 of 6 people found this useful

  • 4.0 out of 5 stars

    had to reformat

    • Written by from Cincinnati

    I first used this product and everything worked fine with my 32gb memory card. I updated to 6.1 and it stopped being recognized. i did reformat the card in my camera (Canon 60D) and it was again recognized by my Ipad 3.. People are so quick to blame apple, when if you take the time, things do actually work.

    25 of 27 people found this useful

  • 1.0 out of 5 stars

    Does not work

    • Written by from Richmond

    I can connect my Canon T4i to it, and the iPad recognizes it. When I click Import All, the camera lights up and the iPad seems to be importing. But the end result is a exclamation point (!), and the photo is not uploaded.

    I'm not sure if it's the SD card? I'm using a Sandisk 32 Gb Class 10 card. Or maybe there's just a bug between the iPad and the camera?

    20 of 26 people found this useful

  • 2.0 out of 5 stars

    Not for Hero3 or SDXC

    • Written by from los angeles

    Cannot connect camera because it draws too much power.
    Cannot read SD card because of the format Hero3 requires.
    I can still use it as a usb midi interface, so it gets 2 stars.

    28 of 33 people found this useful

  • 4.0 out of 5 stars

    SDXC Cards

    • Written by from San Jose

    Using the SDXC card directly in this device did not work for me (exFAT format) but using it through my camera with the camera set to MTP (or PTP) mode and it worked like a champ. Using the standard storage mode did NOT work on my Olympus OM-D M-5.

    Formatting with exFAT is for high capacity cards like mine, 64GB and for speed. Makes no sense to use SDXC with FAT.

    19 of 19 people found this useful

  • 2.0 out of 5 stars

    Does not work with my new equipment

    • Written by from Saginaw

    I have the new GoPro Hero Black HD camera with a top of the line Ultra 64GB Micro SD XC and it says "Cannot read the connected storage media". I found an old old 1GB SD card in the bottom of a junk drawer, plugged it in and it works great! So from my experience it only works with old technology, not new technology. My little backup drive and my GoPro it says "The attached accessory uses too much power". So I can old use it if I have old equipment I suppose. I want a refund as its useless for me.

    30 of 33 people found this useful

  • 3.0 out of 5 stars

    Useless with modern SDs

    • Written by from Saddle Brook

    Since modern SDXC cards come formatted in ExFAT, this whole kit becomes completely useless: you can't connect a camera via USB, because it (the camera) also gets charged via USB, so iPad will simply disable the port altogether ("Accessory draws too much power" or something to that effect), and you can't plug the SDXC directly, because iPad apparently can't read ExFAT formatted drives.

    ExFAT is the default file system for SDXC for its higher performance features and larger maximum file size supported than the older FAT16 or even FAT32. New HD cameras can't work properly with flash drives formatted in FAT32 (example - GoPro Hero3 Black Edition with ProTune on, or at super-HD resolutions, like 2.7k or 4k), so you have to use ExFAT... Which makes it impossible to preview the footage on an iPad, using this kit.

    46 of 50 people found this useful

  • 5.0 out of 5 stars

    Works very well

    • Written by from Moorhead

    I purchased the camera connection kit for my iPad 2 and couldn't be more pleased. I took several test photos with my T3i, plugged the SD card into the adapter and into the iPad. It was immediately recognized, brought up the photos and gave options for importing or deleting. Once imported I could delete the photos from the card and it was ready to go back in the camera. This couldn't have been easier. It does exactly what I expected it to do.
    I haven't tried the USB adapter yet but that wasn't crucial for my needs. If that works well it will just be an added plus.

    18 of 23 people found this useful

  • 1.0 out of 5 stars

    DOA

    • Written by from Toms River

    Tried several types of SD cards-plug in and nothing happens
    iPad2 with iOS 6.01

    40 of 58 people found this useful

  • 4.0 out of 5 stars

    iPad & Contour Roam 2

    • Written by from Reading

    So easy to use, worked first time, import nice and easy, options to delete from Camera once imported. Only tried 720HD @ 50 fps, but this is the most common setting for action. Retina display is perfect and watching on the TV using Apple TV is great for family viewing. Tip, keep recordings short or edit first and post straight to Facebook.

    9 of 12 people found this useful

  • 1.0 out of 5 stars

    Very limited

    • Written by from Mechelen

    Only works with a very limited number of products, even has problems identifying apple products. Micro sd adapters for example will not be recognised by the sd plug, most USB devices will also be unable to connect including apple products. None of my USB devices works with the USB plug. Ipad 3rd generation crashes or freezes for long periods while using any of these two devices. I find this another example of apples demise and out of touch with the wide range of products consumers use these days.

    45 of 57 people found this useful

  • 1.0 out of 5 stars

    Unusable

    • Written by from Brisbane

    This does not read my SD card ? What a waste of money. I want to download video from my camera onto iPad? Bought this adaptor that does not work!

    55 of 73 people found this useful

  • 1.0 out of 5 stars

    Not working with micro sd adaptor

    • Written by from istanbul

    My gopro cam uses micro sd card. I use 64gb micro sd card and sandisk adaptor. It does support. I cant transfer anything. Its wortless.

    44 of 52 people found this useful

  • 2.0 out of 5 stars

    Not working with my Canon 350D nor my Olympus TG 620...

    • Written by from Barcelona

    If I connect my Canon 350 to my iPad (3rd Gen, iOS 6.1) I got "device not supported".

    If I connect my Olympus TG 620 (purchased today) I got "device uses too much power".

    How comes? Am I doing anything wrong?

    If I connect my iPhone 5, it works.

    If I connect the SD card from my Olympus, it works. Cannot connect the Canon 350 card, as it uses Compact Flash.

    Please Apple fix this thing!

    34 of 38 people found this useful

  • 2.0 out of 5 stars

    Works fine uploading to my iPad; but camera no longer recognizes it.

    • Written by from Temple Hills

    I bought the adapter because I travel a lot. I didn't like waiting until I got home to download my pictures from my camera. My laptop is too heavy to lug around while taking pictures so I liked the fact that I could lighten my load with my iPad. The trouble came when I put the SD card back in my camera to take more pictures. My camera would no longer recognize the card. It also would not allow me to re-format it either. Essentially my SD card is now useless.

    24 of 26 people found this useful

  • 2.0 out of 5 stars

    Uh Really?

    • Written by from Tariffville

    When I load pictures from the SD card that has been in the camera it works, but when I upload other photos to the SD card from my computer to transfer them it doesn't work. The same camera, same tag, same SD card. I was under the impression this would make uploading photos easier than syncing to iTunes. Not! Oh.. and the only idiot is one who answers a question without understanding the question first.

    20 of 25 people found this useful