• 5.0 out of 5 stars

    Excellent Case

    • Written by from Fresno

    This has to be the best case I had in a while. It feels excellent in the hand everything about it is a plus. Buttons maybe be a little tough but that's what you get with a new case over time it will be easy. I'm planning on adding a tempered class screen protector. Has anyone tested it out if so how is it?

  • 5.0 out of 5 stars

    Surprising protection

    • Written by from Livermore

    Had several mishaps since getting this, but no problem. Pleasantly surprised a bumper case can provide such fine protection.

  • 5.0 out of 5 stars

    READ THIS !!!

    • Written by from Sugar Land

    I have many cases! I got the red Tavik bumper. The bumper is uber high quality...fits tightly around the iPhone with no chance of sagging or getting loose (at least at this time). Surprisingly, for such a tight case, it is fairly easy to take off. And because it is tight, there is no chance of the corners to peel back on impact (front or rear face). Everything is great...EXCEPT power/sleep button. It is hard to press and hurts your finger(s) with repeated press. So, why 5 stars?

    READ THIS: There is an EASY fix to the power button. Take a SHARP POINTED KNIFE. From top of bumper (withOUT your iPhone in it!), stab/punture the SIDES of the power button...two tiny holes on EACH side of the button. This releases the tension. Put tiny holes, NOT anything bigger. Make it so that the pointed end of the knife JUST comes thru the plastic/rubber on the inside. 4 holes total...2 each side. TAVIK just made the tension too much with the power button...this "mod" releases the tension.

    NOW, the power button works PERFECT! CLICKY TOO. Easy to press with a satisfying click.

    Hope this helps...AWESOME BUMPER...HIGH QUALITY. HIGHLY RECOMMEND. It is compatible with ZAGG HD front & back protectors. It does NOT eat too much into the display...so, should be OK with 99.9% of protectors.

    Hope this helps!

  • 3.0 out of 5 stars

    Don't get the white bumper!

    • Written by from Anaheim

    I keep my phone in my pocket, and the white rubber grabbed the indigo blue from my old jeans (washed). I can't get the blue to come off the rubber.

    Apple refunded my money and I got a black one, and I'm happy, although the buttons are hard to push.

  • 4.0 out of 5 stars

    Great Bumper Case

    • Written by from Corpus Christi

    I recently purchased the Tavik Outer Edge bumper case for my iPhone 5S.

    Many other posters have mentioned the quality of the packaging as an indicator of the product itself and I'm inclined to agree. The case is actually smooth despite the appearance of being "tacky" like many rubber products. Its matte finish is indicative of the smoothness of the case. I would not call it slippery by any means, however.

    The case fits snuggly around the phone and the molding allows the phone to sit either face up or face down without any part of the phone itself touching the surface. The case has enough give to act as light padding for drops.

    I'm currently using my Outer Edge in conjunction with the Zagg Glass screen protector with no issues; it's a great combo for protection and looks.

    Whereas other reviewers mentioned the difficult pressing the power button, I happened to find a case that had no issues whatsoever. Perhaps that's an issue they've slowly corrected with each subsequent run of the product. One of the cases I tried on in another color still had this issue although you don't need to "click" the button to lock or turn on the screen. The pressure of pushing is enough to have the desired effect even on cases with this particular "problem."

    1 of 1 people found this useful

  • 1.0 out of 5 stars

    Don't - You'll just return it.

    • Written by from Signal Hill

    The case is hard plastic, very hard plastic. The control buttons are all of the same molding. There is no way no how you can use the buttons on the side of the phone or on the top due to how hard the plastic is and how the buttons and bumper are one molded piece.
    TAVIK claims they are " Visionaries " they should vision on how to redesign this case and destroy the current stock.

    2 of 3 people found this useful

  • 5.0 out of 5 stars

    Love this bumper!

    • Written by from Midland

    I absolutely love this product, and I have tried a lot of bumpers. The iphone 5S is so beautiful, why would you want to cover it up? This bumper looks great while only covering the edges. Everything you need (buttons and attachments) are still accessible. The feel is great with softer plastic around the edges to allow it to grip so you can set it on an angled surface for instance, and a harder plastic in the middle. The plastic looks nice - doesn't look cheap. Some have complained about the top button being hard to push. It is certainly harder to push than with no cover, but I don't think it's too bad given the advantages offered by this bumper.

    I use mine in combination with a Zagg HD invisishield on the back and the new Zagg glass on the front, and this bumper is compatible with both. The only way the phone could look better is if I had unlimited funds and left it naked and exposed.

    3 of 3 people found this useful

  • 1.0 out of 5 stars

    awful!

    • Written by from Pinellas Park

    I would give it 0 stars, if I could.
    This is the worst piece of junk I had the displeasure of using in a long time.
    You need to be a body builder to have enough strength in your fingers to press the tiny volume or power buttons on it.
    Completely unusable! And I am not a small guy.
    A 1 dollar Chinese no name bumper is better than this.
    They obviously spent more money and attention to design the fancy shmancy case than the product itself.
    I would send it back if I would not be out of the country.

    Apple, shame on you for selling this. Just avoid.

    2 of 8 people found this useful

  • 2.0 out of 5 stars

    Good quality, poor design

    • Written by from Moorestown

    The quality of this product is actually quite good. The materials used are top-shelf and it's solidly built.

    The problem is the design. The sides of the case are very smooth and almost greasy feeling. This makes it somewhat slippery when holding your phone in your hand. In fact, if I lay my iPhone vertically in my hand and use a very loose grip, it slides down very easily. Other cases I've used have much more grip.

    The other big issue are the button covers. The on/off switch at the top is very stiff and requires an unnatural amount of force to sleep or wake your iPhone. The volume buttons are also very stiff, with very little feedback.

    The case itself is a little too padded overall, make for a bit of a wider grip than I would like. If your primary concern is to have maximum protection in a bumper, I think this offers it, but you'll have to weigh that against the flaws noted above.

    Overall, I cannot recommend this case - especially at this expensive price - because of its glaring design flaws. There are much cheaper bumper cases that are available, and though they might not last as long, they offer a much more user-friendly design.

    3 of 4 people found this useful

  • 5.0 out of 5 stars

    Great Bumper

    • Written by from Charleston

    Bumper feels sturdy in your hands, and despite the reviews about the buttons they are not bad once you have gotten to use them. My favorite case.

    2 of 2 people found this useful

  • 1.0 out of 5 stars

    Do Not Buy the White Case

    • Written by from Los Angeles

    Purchased the white colored case for my white iPhone 5s and just three days later the non-coated areas of the bumper have turned black (front and back edges). A fairly expensive case that looks like it has seen better days in just the three it has been used for.

    In my opinion this is a design flaw. They should use a different material for the edges to prevent this.

    12 of 12 people found this useful

  • 1.0 out of 5 stars

    Poor case

    • Written by from Hinsdale

    Very difficult to turn on and off or use the volume buttons. The older version bumper was much better then this one. This is just a cheaper and poor quality version of the old one!!!! If you had the old bumper you will be very disappointed with this one!!!!!!

    4 of 5 people found this useful

  • 3.0 out of 5 stars

    Practical but inelegant in black with the 5s

    • Written by from LONDON

    Fits very snugly and found no issue with buttons being difficult to press. However on an aesthetic level the black bumper does not look great on the black/space gray 5s. That's because space gray has a warmer hue than the bluer charcoal grey of the black bumper's perimeter. Creates an unfortunate color clash when you look at the back of the phone.

    5 of 8 people found this useful

  • 3.0 out of 5 stars

    nice case, but pricey and doesn't work with Amazon Basics Lightning cable

    • Written by from Boulder

    I bought one of these cases yesterday at my local Apple Store, because I had the bumper case for my iPhone that Apple gave away back during the antennagate scandal. The Tavik bumper is beautiful and feels just right.

    The two strikes against it are that it costs $30 (similar cases on Amazon cost $10) and the Amazon Basics USB-to-Lightning cable doesn't fit in the phone's plug when the case is on.

    2 of 3 people found this useful

  • 5.0 out of 5 stars

    Excellent bumper

    • Written by from San Francisco

    The bumper provides a solid grip on the phone, protects the outer edge, and if placed face down on a table, the face will not contact the surface. I also like that it doesn't cover up the back of the phone; my enclosed case for the iPhone 4 would trap dirt and other pocket detritus that would scratch and mar the back. I've also had brand-name cases where the finish would chip off, glued-on components would become unglued after just a couple of months, etc., but I anticipate none of these problems with this bumper.

    The power button is a little tough to move, but it's not a big deal. Also, as other reviewers have pointed out, the cutout for the headphone plug is too small for some plugs, and it's not easy to peel off the bumper. Otherwise, it's perfect for my purposes and my phone feels less fragile.

    2 of 3 people found this useful

  • 5.0 out of 5 stars

    I really love this case

    • Written by from Sierra Madre

    I originally wanted the Speck PixelSkin HD, but I discovered that the 5 version is far inferior to the 4. I wanted a case that both looks good and protects the corners from falls. The Outer Edge case satisfies both requirements. The edge is substantial enough to protect the phone from corner impacts, and it provides enough space on both the front and back sides to safely lay the phone on a flat surface. It also fits very snugly--there is no way the phone will ever slip out of the case. Visually, the case is about as minimalist as it gets--the beauty of the phone is not hidden by a ton of plastic, and the slim form factor of the phone is essentially unaffected by the bumper design. Of course, all this means that there is more risk of scratching the phone with keys or coins if one keeps the phone in the same pocket with other objects. As I never put anything in the same pocket as the phone, I am able to prevent damage to the device. As far as the stiff buttons are concerned, that is true--it is difficult--at first--to operate the volume buttons. However, the buttons got easier to operate after a few days usage, and now that is not a problem any more. If you want a minimalist case that provides basic protection from falls while preserving the beauty of the phone, and you are careful to keep other objects away from the phone, then this case is one you should consider.

    5 of 5 people found this useful

  • 1.0 out of 5 stars

    One design flaw

    • Written by from Carnegie

    The opening for the charging port appears larger than it is. When you buy it, you think it will fit most chargers, but in fact, the opening has a little lip inside of it that reduces the diameter. The OEM Apple charger fits, but almost no other wall or car charger fits.

    OK if all you have are Apple chargers, but I need more flexibility than that.

    10 of 13 people found this useful

  • 4.0 out of 5 stars

    Great bumper!

    • Written by from Pasco

    I had the Apple brand bumper for the 4s and loved it. This case is an improvement in many ways.

    Pros:
    -Rubber is stiffer, will not degrade as easily
    -Snaps onto the phone, unlike the 4s bumper, there's no section that is only rubber to break
    -Fits firmly on the phone, doesn't feel flimsy or loose

    Meh:
    -Still has a very small opening for the ports, works fine for standard lightning connector and EarPods, but does fit the lightning to HDMI adapter or most headphones.

    Cons:
    -Buttons for volume and power are VERY firm. The other reviews are correct in stating that the amount of force required to use the power button can hurt your finger.
    -BUT, there's an easy fix: While not snapped onto the phone, exercise the buttons. After less than a minute of wearing in the power button, it now takes what I would consider to be a "normal" amount of force to actuate.

    While I don't foresee needing a new one after a year like i did with the 4s, I'd gladly re-buy for another year.

    9 of 9 people found this useful

  • 4.0 out of 5 stars

    Three drops; not a scratch on my iPhone 5S

    • Written by from Savannah

    I have dropped my iPhone 5S three times already, and the Tavik OUTER EDGE Bumper Case worked like a champ every time. I highly recommend it.

    Two minor complaints: 1. The cover over the power button is tighter and harder to press than the cover over the volume buttons. 2. It's a little thicker than the Apple-branded bumper for the iPhone 4S.

    1 of 2 people found this useful

  • 2.0 out of 5 stars

    Great Bumper, Until...

    • Written by from Winter Park

    This bumper does not work with the Apple Lightning to HDMI adapter, otherwise this is a great case but if you use third party cables or any adapters that are thicker than Apple's stock lightning cable you are out of luck.

    I will not be using this case for much longer.

    1 of 1 people found this useful