The polished aluminum MX LCD Arm gives you the freedom to fine-tune the placement of your mid-size display or all-in-one computer
You get the flexibility to adjust height, extension/retraction motion, integrated tilt and portrait-to-landscape orientation for peak comfort and productivity.
Supports LCD size: Up to 30 in./76.2 c, Supports LCD weight: 14 to 30 lbs./6.3 to 13.6 kg, Lift: 5 in./13.0 cm, Tilt: 75 degrees, Pan: 180 degrees, Rotation: 90 degrees P/L (portrait mode incompatible with 30-in. display), Mounting standards: VESA FDMI, MIS-D, 75/100,
- Accommodates mid-size displays and all-in-one computers weighing up to 30 lbs./13.6 kg
- Position your display for maximum ergonomic comfort to relieve eye, neck and back strain
- Free up more workspace on your table or desktop
- Upgrade LCD monitors and TVs with improved ergonomic adjustment
- Pre-assembled arm offers monitor/TV theft deterrence
- Rotate screen for portrait viewing of photos and pages—eliminate scrolling
- Cable management feature conceals and routes cables under the arm, out of the way
- Patented CF motion technology provides premium ease-of-use display adjustment
- Easy-to-use, simple installation and effortless operation
Did you notice?Offers full range of height adjustment, extension/retraction motion, tilt and portrait-to-landscape adjustment.
Apple Recommends ForEasily positioning your display for maximum comfort and productivity.
What's in the Box?
- Ergotron MX Desk Mount LCD Arm
- Weight: 9.0 lb./4.2 kg
- Mfr. Part Number: 45-214-026
- UPC or EAN No.: 698833009378
- Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.
- Warranty: Five years (For details, please visit www.ergotron.com/Support/WarrantyPolicy/tabid/195/Default.aspx.)
Ratings & Reviews
I used the Ergotron arm along with the VESA Mount Adapter Kit to mount my 27-inch i7 iMac. The iMac now floats serenely over my I used the Ergotron arm along with the VESA Mount Adapter Kit to mount my 27-inch i7 iMac. The iMac now floats serenely over my desk. The weight of my fully decked out BTO iMac was not an issue since after removing the aluminum stand the computer weighed in at 29 pounds. I did have to increase both tension settings of the arm. The installation took about an hour even with the three mistakes I made. …
- Written by Mark H from Ramona
205 of 217 people found this useful
Beware: This mount is not for the small-medium sized desks!
I think this mount's high ratings may be misleading about its usability. It isn't a poorly designed arm, but it is a design that c I think this mount's high ratings may be misleading about its usability. It isn't a poorly designed arm, but it is a design that caters to larger-sized desks. I give it three stars because it lacks in universality—some minor design tweaks could probably fix this. The dimension you should pay close attention to is the depth of your table-top. The arm's hinge allows it to be pulled outward or folded inward; the problem is the folding-in part. It's span (when folded/collapsed) is quite large. It is possible to circumvent this problem by swiveling the arm off to one side, and then twisting the screen so that it points back at you; but this is an awkward look and feel, and it puts a lot of stress on the clamping device that mounts the arm to the desk. All in all, this LCD Arm is built well, but it is built for those who can accommodate it. …
- Written by Noel H from Houston
169 of 190 people found this useful
Fantastic, built like a tank
I shouldn't have been hesitant to buy this at all. This thing is built to last and nothing about it is flimsy or low-quality. It w I shouldn't have been hesitant to buy this at all. This thing is built to last and nothing about it is flimsy or low-quality. It will handles my 26" monitor like a champ. The tension adjustments are well designed and, when adjusted properly, compensate for any monitor weight. Smooth, fluid movement. If I had to cite any cons, I would say the cable management isn't that elegant and you might have to make a trip to the hardware store for some nuts and bolts if your monitor's VESA mount didn't come with them. …
- Written by Jonathan L from Auburn
121 of 130 people found this useful
Does not provide extra height.
I purchased the arm to raise the height of my Cinema display, since I feel that the built-in stand is not tall enough. However thi I purchased the arm to raise the height of my Cinema display, since I feel that the built-in stand is not tall enough. However this arm maxes out at perhaps 1/4" taller than the original stand, so it's useless for my purpose. It's really disappointing because the build quality is good and it looks quite nice. Just wish it had a few inches more height. …
- Written by Kenneth B from San Francisco
2 of 2 people found this useful
Spring not strong enough to support the monitor
I bought two of these Ergotron MX Desk Mount LCD Arms, one for a 27" thunderbolt display and one for a 27" iMac.
Infuriatingly, I bought two of these Ergotron MX Desk Mount LCD Arms, one for a 27" thunderbolt display and one for a 27" iMac.
Infuriatingly, the springs don't support the weight of the displays. …
- Written by Edward M from Bristol
4 of 6 people found this useful
Good stand for 27" Display, however a little short
I bought this for use with my 27" Thunderbolt Display, and functionally it works great. The tension needs to be adjust to almost t I bought this for use with my 27" Thunderbolt Display, and functionally it works great. The tension needs to be adjust to almost the highest setting, but it does hold steady, and it gives you a wide range of positions you can place the display in. As other reviewers have noted, you will probably need a larger desk to really take advantage of it.
Cons: The one odd thing I noticed about it is that, even fully extended upwards, it is still almost half an in shorter than the stand that comes with the display itself. I had hoped to use it for a standing workstation, but I think it is going to be too short for that. …
- Written by Alex H from OTTAWA
10 of 10 people found this useful
Questions & Answers
Answers from the community
Will this desk mount work with a tempered glass desk?
- Asked by Mike C from Cranston
- Mar 18, 2010
I honestly wouldn't test it. There will be quite a bit of torsion that could twist and break the gl I honestly wouldn't test it. There will be quite a bit of torsion that could twist and break the glass. 20-30 lbs will be pushing at an angle which multiplies the lbs of pressure through a very low fulcrum point. (weight of monitor * inches from clamp = weight applied to glass during torsion) Just think of the arm as a wrench, and the desk as a bolt. …
- Answered by Norman L from Phoenix
- Sep 8, 2011
This mount clamps on to the edge of a desk surface and cannot be attached to a wall.
Take a loo This mount clamps on to the edge of a desk surface and cannot be attached to a wall.
Take a look at the TJ540LL/A Wall Mount from Bretford...it articulates out from the wall and may work well for you. It has a 12-year warranty which is nice. …
- Answered by Matt P from Franklin Park
- Dec 8, 2009
Can this be used on a late 2012 iMac 27 inch?
- Asked by Robert G from Irvine
- Jan 9, 2014
Will this work with the new 27 inch IMAC? The new IMac seems to be .5 pounds too heavy ....
- Asked by Richard W from Los Alamitos
- Oct 21, 2009
Works great on my 27" iMac. A few notes:
* you do need the apple 24/27" apple vesa mount adapter. Works great on my 27" iMac. A few notes:
* you do need the apple 24/27" apple vesa mount adapter.
* weight isn't a problem since it's under 30 lbs without stand. the tension adjustments have to be pretty much as tight as possible to support the weight. because of the weight/tension it requires some light umph or effort to push the iMac back or manipulate is position. Overall I'm still happy since it clears my desktop space.
* don't think you can rotate the iMac 90 degrees to achieve a vertical screen . Even if the iMac allowed for it the stand is not tall enough to allow this 27 inch beast to rotate more than 15-20 degrees without hitting the desk - no matter the pitch.
* I had no problems with the tightening torx screws or other fittings as the other poster suggested. I think he may ave used the wrong angle when tightening the torx screws ( ie poor alignment / not fully attached when tightening - or maybe he tightened too hard). I suggest taking your time when doing it. …
- Answered by Tim R from Calgary
- Nov 27, 2009
Will this work on the Apple 30" display?
- Asked by Matthias D from New York
- Nov 16, 2009
Yes, i have one working with my 30" Cinema Display just fine. But I have another one that is mounted Yes, i have one working with my 30" Cinema Display just fine. But I have another one that is mounted to a 23" Cinema Display and the Monitor just seems not heavy enough for this arm.. its just by a pound I would say, but the monitor keeps on to tilt back. maybay it's because the 23" has the Mount Kit right in the middle while the 30" has it a little more upper so that the weight is more to the buttom.
But anyway.. the Ergotron MX is a fine piece.. unpacking and holding it in your hands allready will make you smile ;)
Kind Regards from Germany …
- Answered by Stefan R
- Jan 7, 2010