Power Support Anti-Glare Film Set for iPhone 3G
Static cling film that protects your iPhone 3G screen from scratches, dust, and dirt. Resists smudges and fingerprints, too.
Learn more
Overview
Power Support’s revolutionary anti-glare films are what every iPhone 3G needs. With their state-of- the-art static cling adhesion, these precision-cut films are easy to apply and offer optimal protection for your LCD screen.
Features
- Provides traction for improved responsiveness
- Advanced static cling for stay-put adhesion
- Films can be easily cleaned and reapplied after use
- Resists smudges and fingerprints
- Keeps LCD screen free of scratches, dirt, and dust
In the box
Two precision-cut screen films One pre-installation filmMfr. Part No.: PIA-06E
Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.
This accessory is compatible with the following:
-
iPhone 3GS
-
iPhone 3G
Most Useful Reviews
-
Power Support Anti-Glare Film Set for iPhone 3G
Great film once again
Written by JW from Lexington
Jul 18, 2008
Basically the same thing as the original iPhone version, completely fingerprint-proof, yet it isn't as clear as the Crystal Film version.
I found it incredibly easy to install by wetting the film before applying, and ended up with no air bubbles at all.
The only downside to the film, as some reviewers stated in the Crystal Film, is that it is a little less than 1mm too short on all sides so it doesn't fully cover the front side, but I haven't found that too be too much of an issue yet. …More617 of 677 people found this useful
Was this useful?
-
Power Support Anti-Glare Film Set for iPhone 3G
Perfect!
Written by SW from PORTLAND
Jul 18, 2008
I bought this product for my original iPhone, and a year later it still looks "like new". So I'm happy to report that the new anti-glare film for the iPhone 3G seems to be identical ... Power Support knew better than to tamper with perfection.
The key to using this product is to wipe your iPhone with a clean damp cloth then a clean dry cloth (not a paper towel) before applying the film.
Have two pieces of Scotch tape handy when you apply the film ... one to lift the corner of the film and another to gently remove a stray piece of dust from the iPhone, if necessary.
…More577 of 630 people found this useful
Was this useful?
-
Power Support Anti-Glare Film Set for iPhone 3G
Thinking about it? Just get it!
Written by KW from BROOKLYN
Jul 19, 2008
I wasn't going to get this film until an Apple employee showed me his iPhone. I got it and it's great.
The film is slightly textured to give good feel.
Absolutely no smudges or fingerprints.
Film is very thick, giving protection piece of mind
Absolutely no loss of touch screen sensitivity.
It does "gray" or dull the screen very very slightly. But, it's only noticeable the first 30 mins after it's on; then, you forget about it. …More566 of 615 people found this useful
Was this useful?
Most Recent Reviews
-
Power Support Anti-Glare Film Set for iPhone 3G
Recommended
Written by JF from Vandalia
Dec 20, 2009
I've tried many different brands of protective film for several iPod models and both iPod touch and my iPhone. Some of them were a bit challenging to apply and some didn't last very long whether they started to peel or were easily scratched. Power Support's film is by far the best I have used. I have had it on my iPhone 3GS for a little over six months and it still looks as good as when I first applied it. Touchscreen sensitivity is not affected in the least.( I think Apple uses a capacitive type touchscreen anyway.) I would highly recommend this protective film to anyone wanting to preserve their touchscreen from everyday nicks and scratches. Well worth the few dollars for peace of mind for an investment like iPhone. …More
1 of 1 people found this useful
Was this useful?
-
Power Support Anti-Glare Film Set for iPhone 3G
Excellent Product
Written by GH from Bothell
Dec 18, 2009
This has to be the easiest one to install that I have ever used. Every other product that I have tried has left air bubbles in it, because they use an adhesive, that once laid down, are hard to remove.
With this product, which uses static to stick to the phone, you simply use a piece of scotch tape to lift up the film, and another piece of tape to remove the dust particle, and then lay it back down. …MoreWas this useful?
-
Power Support Anti-Glare Film Set for iPhone 3G
Can be much better!
Written by JI from Bronx
Dec 18, 2009
Biggest problem with these are putting them on. If one mistake you'll have air bubbles. don't touch the part that goes on the phone or you will big problems. They are good if everything is done just right! Too much money for plastic. …More
3 of 5 people found this useful
Was this useful?
Questions & Answers
Most Interesting
-
Should I buy the Crystal Film or Anti-Glare Film for my iPhone 3GS? Or I can apply both onto the iphone?
- Asked by GT from Singapore
- Oct 1, 2009
Best Answer
The anti-glare film does what it's supposed to do, but it also changes the way the screen feels. It is slightly textured, so there's a little more friction under your finger. This texture also makes it practically impossible to put a crystal film, or any film for that matter, over it without having a lot of air bubbles. It also defeats the purpose of having an anti-glare film in the first place. if you're thinking of putting an anti-glare film over a crystal film, the only benefit I see would be the extra thick protection. However, you may notice that the phone won't pick up your gestures as well. The crystal film by itself, if applied correctly, just disappears and you hardly even notice that it's there. The feel is pretty much the same as the glass itself. …More
- Answered by KC from San Jose
- Oct 6, 2009
- 23 of 27 people found this useful
- 3 more answers
-
What's the difference between the Anti-Glare Film and the Crystal Film?
- Asked by CA from Surrey
- Oct 19, 2009
Best Answer
Anti-Glare is essentially matte. That means it won't reflect the light. Crystal Film is pretty much the same as your iPhone screen - it's shiny/glossy. …More
- Answered by TU
- Oct 20, 2009
- 24 of 24 people found this useful
- 1 more answer
-
How do you clean the Crystal Film? I could not at all. Whenever I try to wash it, it comes out ugly with water spots and lint collects on it.
- Asked by PJ from Cuyahoga Falls
- Oct 19, 2009
Best Answer
Well I use cleaner that you use for spectacles and spray some on whilst the film is still on the phone and a lint free cloth, like the one that comes with the phone. It still comes out crystal clear and smear etc... free. …More
- Answered by CA from Great Missenden
- Oct 21, 2009
- 5 of 5 people found this useful
- 2 more answers
Most Recent
-
Can the antiglare be removed and stick back again? Will it lost it stickiness
- Asked by JW from Hougang ave 8
- Dec 11, 2009
-
What can I do to not have ait pockets between the screen and shiny film
- Asked by TT
- Dec 1, 2009
-
Is anyone familiar with the mirror version of this ? It's offered on power support's website.
- Asked by NS from Marietta
- Nov 30, 2009
-
Is anyone familiar with the mirror version of this ? It's offered on power support's website.
- Asked by NS from Marietta
- Nov 30, 2009
-
Does the screen protector affect the use of the screen or reduce its sensitivity? Does it affect its responsiveness?
- Asked by NI from Walsall
- Nov 29, 2009
-
Will the glue stick to the original screen after removing, just in case I change my mind about using?
- Asked by CW from New York
- Nov 26, 2009
-
Is the crystal film removable or is it permanent?
- Asked by GS from Cameron Park
- Nov 12, 2009
-
if I put a screen protector in my 3gs will this damage the oleophobic film
- Asked by KA from frankston
- Nov 6, 2009
