With Chamberlain MyQ Garage, your iPhone, the free MyQ app, Wi-Fi, and any compatible garage door opener, you're connected and able to open or close your garage door from anywhere. You can quickly see the status of your garage door on your iOS device, then open or close it with a simple tap of the screen.
Easy wireless setup with your home Wi-Fi network
Simply install the MyQ Wi-Fi Hub using the supplied screws and mounting bracket near your garage door opener. Then mount the door sensor on the inside of your garage door. Download the free Chamberlain MyQ app on your iPhone, iPad, or iPod touch and follow the easy setup instructions.
Stay in touch
Receive alerts when your garage door opens or closes. You can personalize these alerts according to how you want to use them. You can even set different alerts based on the time of day or day of the week.
Compatible and safe
Chamberlain MyQ Garage works with most brands of garage door openers manufactured after 1993. And for true peace of mind, it has two safety features that use sound and light to alert anyone in the garage that the door will be closing whenever you activate it remotely.
- Monitor, open, or close your garage door from anywhere with your iPhone or other iOS device and the free MyQ app
- Receive alerts when your garage door opens or closes
- Compatible with most major brands of garage door openers manufactured after 1993
- Installs in minutes and works in conjunction with your home Wi-Fi network
- Safety features alert anyone near the garage that the door is closing when you close it remotely
- Free MyQ app available from the App Store
- No annual or monthly fees for any services
Did you notice?An estimated 76% of U.S. households use their garage—not the front door—as the main entry/exit point in their home.
Apple Recommends ForMonitor, open, or close your garage door from anywhere with your iPhone, iPad, or iPod touch.
What's in the Box?
- Chamberlain MyQ Garage Wi-Fi hub
- Door sensor
- Mounting bracket and hardware
- Installation instructions and free app download
- Height: 1.28 in./3.25 cm
- Width: 4.4 in./11.18 cm
- Weight: 0.95 lb./0.43 kg
- Length: 4.4 in./11.18 cm
- Mfr. Part Number: MYQ-G0201A
- UPC or EAN No.: 012381177400
- Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.
- Warranty: One-year limited
Chamberlain MyQ Home Control
Control your garage door opener and house lights from anywhere in the world using Chamberlain MyQ Smartphone control.
*** Note: Requires Chamberlain MyQ hardware. Learn more about the compatible products at www.chamberlain.com
The Chamberlain MyQ Home Control App empowers you to easily and confidently monitor and control your home from anywhere.
MyQ technology brings you peace of mind, security and control when you forget to close the garage door, want to open it from afar to let people in, or just keep a closer eye on your home by turning on lights to make it look like you are home.
The Chamberlain MyQ App combined with any one of the Chamberlain MyQ accessories allows you to monitor and control your garage door opener and light controls with your iPhone, iPad or iPod touch. And with push notifications enabled, the iOS device can receive alerts that the garage door is open or a light was left on.
- Monitor and control multiple garage door openers
- Turn lights on or off
- Customize to receive alerts when the garage door or lighting status has changed
- Modify security levels or add a passcode of your choice
Learn more about Chamberlain MyQ enabled garage door openers, Chamberlain MyQ Garage™ and Chamberlain MyQ lighting products at www.chamberlain.com. …
Ratings & Reviews
Easily smartphone enables any garage door
The MyQ Controller mounts in your garage. It connects to your wireless network so your smartphone can access it via WiFi or the in The MyQ Controller mounts in your garage. It connects to your wireless network so your smartphone can access it via WiFi or the internet via a MyQ (free) service. The MyQ Controller acts as a repeater that sends open/close commands to your garage door opener as if it were a door transmitter in your car. This means it works with nearly any garage door opener.
A separate battery powered sensor mounts on your garage door which confirms if the door is opened or closed. The iPhone App shows a picture of your door in the open or closed state.
You can buy an additional sensor from Chamberlain to work with a second garage door. But that's it. This allows you to smartphone control up to two garage doors.
The iPhone app is basic but workable. Graphics show you the current state of the door and tapping the door opens or closes it.
Easy to install and program especially if you have programmed the transmitters in your car before. …
- Written by David D from Mercer Island
55 of 57 people found this useful
Use with caution!
Following installation on 3-21 everything seemed to be working great. Loved being able to check my iPhone and see that door was c Following installation on 3-21 everything seemed to be working great. Loved being able to check my iPhone and see that door was closed. However, during the last few days - once at night when I was home and today (4-17) when I was away - neighbors called to let me know that my garage door was open. Checked my iPhone today and it showed it had been open for 22 minutes, while I left over 2 hours before that. I closed it from the App and called Chamberlain when I got home. To my surprise, I was advised by their technical support that due to this running over the Internet, there is a 3-5 minute period of time after pressing the "learn" button to set up the controller during which time any other devices used in range of my opener will actually sync with my garage door opener and be able to access it in the future. Granted, the likelihood of this happening may be minimal, but it CAN happen and did. Thus, someone else was opening my garage door, unbeknown to them. I advised I was going to unplug the controller to stop this, but was advised by Chamberlain that in order to remove the other devices, I had to wipe out all codes on the garage door opener and reprogram only those that I wanted to have access. Glad they told me that, but quite a pain to redo everything, except this, of course. Everything should now be okay, and Controller is going back to the Apple Store where I purchased it. Loved idea but do not believe it is safe. …
- Written by Janet L H from Ashburn
69 of 107 people found this useful
A useful tool for absent minded people
I was always forgetting if I closed the garage door. I got this nagging doubt after I am half way to where I am going and then wor I was always forgetting if I closed the garage door. I got this nagging doubt after I am half way to where I am going and then worry about it until I get home or turn around and go back to check. The door has also stayed open all night because I forgot to close it. The MyQ garage door controller is a great solution to the issue. I programmed mine to send me a notification if the door stays open for 10 minutes or more. If I get an alert, I can close the door no matter where I am (cell/network connection required). The device is easy to install and set up. If you have an iOS device, it gets all of the WiFi network information from a bluetooth connection the device establishes with your phone. I have had no issues with it so far. The best part is no more trips back home to check that door. …
- Written by Ted L from Vista
24 of 27 people found this useful
Good in theory, really, really bad in practice
Here's the net from 10-12 hours and 3 calls to Chamberlin:
1) Don't place the gateway near the garage motor head. Place it on Here's the net from 10-12 hours and 3 calls to Chamberlin:
1) Don't place the gateway near the garage motor head. Place it on the wall to your house closest to your wi-fi router. This will increase signal strength to your router, and decrease the RF interference caused by placing it too close to the motor head. If you have the RF interference, you won't be able to program it properly and the RF interference will interfere with operation of the garage door.
2) Get used to resetting the gateway to factory settings, re-pairing with your iphone on an on-going basis. The network handshake of the gateway is very finicky and you will get it set up properly and then it will lose its network connection and you have to reconfigure.
This is a problem because if the gateway loses its network connection and you don't know it you can get a false reading on the door (it could be open when the app says it is closed) or you may not be able to close the door remotely until you have reconfigured the gateway.
Product is a "nice idea" but it needs a lot of improvement before it is reliable enough to have confidence in what it is suppose to do. …
- Written by Sam O from UPPER ARLINGTON
1 of 1 people found this useful
Great overall but there are connectivity issues
This product works great but there are reliability issues specifically related to remaining connected to WiFi. The device does e This product works great but there are reliability issues specifically related to remaining connected to WiFi. The device does exactly what is advertised. I have very expensive bicycles in my garage and love the feature that it will warn me if the garage is left open (alarms are user definable) and I can close the door remotely. But the unit keeps disconnecting from WiFi episodically and attempts to reconnect it can be very frustrating. I have had to perform factory-resets multiple times and then the sequence of re-establishing a connection have not always worked and require repeated attempts. On two occasions I even suspect the device opened my garage door on its own relating to loss of connection. One might suggest the problem is with my WiFi environment in the house however I have multiple other connected devices that never loose connection including surveillance cameras, thermostat, pool controllers, security system, aquarium lighting, generator monitoring, Apple TV, iPads, iPhones, computers etc and none of these other devices every lose connections the way the MyQ garage opener does. The signal is excellent and even relocating the device did not improve the problem. My garage door opener is MyQ compatible. So in summary, I love the features and simplicity of use however reliability of the WiFi connection has been a recurrent problem. …
- Written by Andrew K from PITTSFORD
1 of 1 people found this useful
OK by industry standards but...
So, this is a hardware and software combination. The garage door controller, the part reviewed here, says that it's universal. I d So, this is a hardware and software combination. The garage door controller, the part reviewed here, says that it's universal. I don't know, I only used it with a Liftmaster operator which is a Chamberlain product and it worked fine. Still, the idea of a controller that connects to your wifi network and basically duplicates your clicker is, in my opinion, a pretty elegant solution. In the docs, there's a long list of manufacturers that it works with but there are no guarantees.
Actually putting up the controller is pretty simple *but* I have two garage doors and this system only comes with *one* door sensor (how the system knows that the door is open or now). I had to call Chamberlain (Liftmaster) and work my way through their voicemail system to figure out how to purchase the second sensor. The on-line support was, actually, pretty friendly and helpful and once I got to the right place, they were able to do the entire transaction over the phone and everything went fine. But you'd think that Chamberlain would figure out a way that you could order the extra sensor from the web site.
So, like I said, hanging all the hardware is very straight forward. Problem is the software and software/hardware interaction is pretty difficult to maneuver. I fiddled with it a lot and, finally, after basically resetting everything (controller, door operators, everything) back to zero, got it to work. At one point I had to leave it and come back after dinner. But I did get everything working.
So now it's all working and going out at the beginning of the day works fine. I use the software to open and close the garage door. Please note that I have an Airport Express in the garage so wifi, you would think, is accessible all the time. Like I said, going out in the morning works fine, if you don't mind sitting in your car in the drive way for a little before the door closes.
But coming back in the evening - not so much. Certainly not to the point where I would turn my spouse loose with this system. I have another company's alarm system and that works not over wifi but over cellular (sometimes). I try to time it so that the system is off as I'm driving up to the house. *But* before I can open the door, I must make sure that my phone has connected to my wifi network. The software for this system only works with wifi so if you're on cellular when you drive up, it throws an error and then I need to entirely kill the process to, make sure to connect to my wifi, and then restart the process to get it connect. And sometimes, it won't even let me use my passcode, throwing me all the way back to my logon and password. And when it does that, it forgets my passcode so I have to remember to reenter it. And round and round we go.
Apple would never release a software/hardware combination that is this rough. …
- Written by PETER L from OAKLAND
1 of 1 people found this useful