• 5.0 out of 5 stars

    Used to digitize DV with Final Cut Pro X over Firewire into a MacBook Pro

    • Written by from Féricy

    I used the Thunderbolt to FW adapter to connect a MacBook Pro to my Sony PD100 (from 2001) and it worked first time. The adapter offers FW 800 female so I used an 800/400 cable into a hard disk then another FW cable out of the disk and into the camera. I even have control of the camera from the MBP.

  • 5.0 out of 5 stars

    Powers my portable hard drives!

    • Written by from Antioch

    I almost didn't get this cause of all the bad bus power reviews but gave it a shot. For my hard drives (several different brands) it works PERFECT. Could be my imagination or the fact that I now have a faster computer, but if anything my hard drives seem even faster now.

    I haven't tried daisy chaining anything together but I get plenty of power and speed from 1 hard drive at a time. I hope maybe that helps some people.

  • 5.0 out of 5 stars

    Works as advertised!

    • Written by from Reno

    This was the solution I needed to get iMovie to recognize my Canon GL2 mini DV camera. iMovie controls work. All is well.

  • 5.0 out of 5 stars

    Works with Canon HV20 mini DV camcorder

    • Written by from Bethany

    I have a Canon HV20 mini DV camcorder which uses a 4 pin FireWire (400) port to transfer to a computer. I successfully used the Apple Thunderbolt to FireWire adapter to capture my video. I used a 4 pin to 9 pin FireWire cable from the camcorder to the adapter (9 pin is the 800 FireWire standard). When I plugged this setup into a new MacBook Pro (running Yosemite), I simply launched iMovie and pressed "Transfer" and it captured the mini DV video perfectly. As an aside, I first tried this out at my local Apple store Genius bar using their in-house adapter, which was really great. Kudos to Apple's Genius bar for allowing me to confirm if the adapter was going to work.

  • 5.0 out of 5 stars

    Works well

    • Written by from NEWTOWN

    I bought two of these apprehensively due to quite a few bad reviews. I use mine for a presonus firestudio project audio interface and a 1TB firewire 800 G-Drive and they work perfectly.

    2 of 3 people found this useful

  • 5.0 out of 5 stars

    This does indeed work with PC

    • Written by from Fruita

    Wanted to confirm for PC users that have a thunderbolt port this does work. I have a Presonus Firestudio Mobile running on my Asus G75vx laptop. I was discouraged at first after buying the Apple thunderbolt to firewire adapter. My PC recognized the Apple adapter with no issue as a 1394 controller in device manager, but my Firestudio could not be recognized when connected. My Firestudio is a firewire 400 device. I bought a Rocketfish firewire 9 pin cable that came with a 6 pin adapter. This supplied power to my interface, but my PC didn't recognize the device. I spent many hours on the internet to solve the problem and finally decided to try a new firewire cable. I bought a 9 pin to 6 pin CABLE that didn't need an adapter and presto the device connected beautifully and was recognized by my Presonus Universal Control.
    PC users there is still hope for your firewire 400 devices! Be sure and get a proper cable that is 6 pin to 9 pin and don't waste your money on the silly adapters. (at least not the Rocketfish one).
    I picked up the cable at Radio Shack for $8.00

    2 of 2 people found this useful

  • 5.0 out of 5 stars

    Great adapter

    • Written by from Watertown

    This adapter worked very well. I just bought a new Mac Book Pro and wanted to port over from my four-year old model. I had an external iomega FireWire hard drive. I backed up the old computer with Time Machine. Opened up the new computer plugged in the adapter with the hard drive attached and followed the instructions and in an hour and a half or so I had my new computer up and running. I would highly recommend this adapter. Works as advertised.

    2 of 3 people found this useful

  • 5.0 out of 5 stars

    Success, YAY! June 2014

    • Written by from Roanoke

    Using this cable, in combination with Belkin FW800[female]->FW400[male] cable available here at the Apple Store online, I was able to Migrate from an old (~2005) iMac to a new MBA (2014) by holding down the "T" key at startup of the old iMac to put it in Target mode *AND* make a full backup using that same cable combination and SuperDuper to a LaCie Porsche powered external hard drive (2006).

    1 of 1 people found this useful

  • 5.0 out of 5 stars

    FireWire adaptor for connecting DV camcorder to Mac

    • Written by from London

    This lead is a perfect way to import HDV or mini DV tapes from camcorder - mine is a Sony HDR - HC7 - to Final Cut Pro X or another video editing software on a Mac. Gives full control of the camcorder from the computer interface. Simple to set up and works faultlessly - recommended!

    4 of 5 people found this useful

  • 5.0 out of 5 stars

    IT WORKS!!

    • Written by from Laguna Niguel

    I had concerns about this adapter working after reading all the reviews where people were having issues. But for me, it works brilliantly!
    I have a mac pro 2013 at work and use the adapter with my 1tb WD My Passport Studio Portable HD. I was reading on one of the av blogs that the person had noticed the hard drive more responsive and I would agree, it does seemed a lot snappier. Anyhow, hope this helps. It saved me from buying a thunderbolt drive - at least in the short term. Cheers,

    3 of 3 people found this useful

  • 5.0 out of 5 stars

    Works great, looks great!

    • Written by from Wentzville

    I purchased the Apple Thunderbolt to FireWire Adapter to use with my mid-2013 MacBook Air in order to import miniDV tapes with a camcorder with a 4-conductor FireWire port. This adapter works just fine, no problems whatsoever. It is also very small, portable, and it looks a thousand times better than any other adapter on the market. I am very satisfied with this product.

    4 of 4 people found this useful

  • 5.0 out of 5 stars

    Works

    • Written by from Seattle

    Late 2013 27" i7 iMac. The adapter does what it says. I'm running a 6 enclosure, 11 drive FW chain no problem. A bus powered drive works fine, but I'm plugging it in at the end of the chain, so it's drawing power from the other drives, not the iMac. The adapter does get warm when doing large transfers, not too hot, but still.

    It would nicer if iMac still had a native FW port, but I doubt Apple will ever add that back on.

    3 of 4 people found this useful

  • 5.0 out of 5 stars

    Powers canopus advc110 & Works flawlessly!

    • Written by from Bismarck

    I am using a Mid 2012 Macbook Pro Retina and the canopus advc110 to transfer VHS footage. The firewire cable sits in the thunderbolt adapter tightly without any movement and so does the thunderbolt connection in my macbook. I even tried to wiggle the connection and I had no problems. I give this 5 stars and recommend it to anyone!

    1 of 1 people found this useful

  • 5.0 out of 5 stars

    It works for me

    • Written by from PEORIA

    I have a Panasonic Camcorder thats a few years old that uses a 4-oin fire wire to transfer video from the DV Tape to the Computer. I purchased a 4-pin to 9-pin Fire Wire cable, used this adapter with my 13" Retina and it not only saw my camera but transferred the video flawlessly. Pleasantly surprised.

    4 of 4 people found this useful

  • 5.0 out of 5 stars

    Bit pricey but daisy-chain seemed to work

    • Written by from Bristol

    Just hooked up (daisy-chained) three Western Digital My passport Studio drives using this adaptor. Two of the drives are 1TB while the other is 2TB. My first attempt placing the 2TB drive at the end of the chain resulted in unexpected ejection error message. Then I reversed the order placing the 2TB at the start of the chain (assuming the 2TB draws more power than the 1TB drives). It worked fine. For me this proves the concept as it will be rare for me to operate a chain of three portable drives together at the same time.

    One thing to note: the adaptor does seemed to get a bit warm at the thunderbolt end during daisy-chain.

    9 of 10 people found this useful

  • 5.0 out of 5 stars

    Works like a charm!

    • Written by from Istanbul

    I recently bough a mbp retina with thunderbolt ports only. I have m-audio profire 610 audio interface and i saw that adapter, although there are a lot of failed attempts to use this adaptor to connect a FW400 device, it worked like a charm when i plugged my profire 610 with a FW400-800 cable to this adapter.. No external power needed! Great product from Apple...

    8 of 8 people found this useful

  • 5.0 out of 5 stars

    Works like a charm!

    • Written by from Vineyard Haven

    Just connected my external Lacie rugged 1TB drive via the Thunderbolt to FireWire Adapter to my brand new iMac and voila -- it works! Powers the unit without a hitch and the drive functions as it always has via FireWire.

    4 of 5 people found this useful

  • 5.0 out of 5 stars

    As good as my old iMac

    • Written by from Melbourne

    My Firewire 800 Drobo plugs into this adapter and into my new iMac no problem. The drive works just like it always did, as if my Firewire port had never been taken away. Perfect.

    4 of 4 people found this useful

  • 5.0 out of 5 stars

    Exactly what was needed...

    • Written by from West Hollywood

    Very nice product. Works great with my G Drive.

    1 of 2 people found this useful

  • 5.0 out of 5 stars

    Works for me

    • Written by from San Diego

    I read that some people had issues with the adapter not able to powered up their bus-powered portable hard drives and the transferring speeds being slow. Fortunately I have not had those problems. I have a retina display MBP and a WD My Passport Studio FireWire hard drive and have had no issues with the adapter.

    11 of 14 people found this useful