Power Support anti-glare film for iPhone 3G
The anti-glare static cling film protection prevents scratches, dust, and dirt to your screen. Resists smudges and fingerprints, all while offering full protection for your LCD screen.
- Provides traction for improved responsiveness
- Advanced static cling for stay put adhesion
- Films can be easily cleaned and reapplied after use
- Resists smudges and fingerprints
- Keeps LCD screen free of scratches, dirt, and dust
Overview
Power Support’s revolutionary anti-glare film is what every iPhone 3G needs to be equipped with. With state of the art static cling adhesion, the precision cut films are easy to apply, and offer optimal protection for your LCD screen.
Installation instructions
1st Step: Thorough Cleaning
- Clean your iPhone LCD screen with a lint free cloth and a small amount of glass cleaner. Ensure that all fingerprints and particles have been removed.
- Wipe off any excess glass cleaner so that the screen is completely dry.
2nd Step (Pre-Installation Film): Removing any dust particles that may have fallen onto your screen.
- Remove one half of the white backing of the pre-installation film.
- Without touching the LCD screen directly with your fingers, place the half of the film without the backing onto the LCD screen.
- Without touching the LCD screen, remove the second half of the backing. Apply the rest of the film to the LCD screen. Rub it down thoroughly to ensure that the Pre-Installation film has captured all dust particles.
- Remove the Pre-Installation film by pulling it off by the excess film. Do not touch the LCD Screen.
3rd Step (Anti-Glare Film): Applying the Film
- Without touching the adhesive side of the film, push down on the backing to expose the adhesive side.
- Align the edge of the film with the bottom of the face of the iPhone. You can use the button or ear piece hole as alignment tools. Once a proper alignment is found, apply part of the film.
- Without touching the face of the iPhone or the adhesive side of the film, allow for the rest of the film to apply by peeling off the rest of the backing from underneath the film.
- Cover your finger in a lint-free cloth and rub out any air bubbles.
Note: Power Support’s Protective Screen Films come attached to a basic transparent plastic backing. Whenever applying films, you can touch either side of this transparent backing and the non-adhesive side of the film. However, do not touch the adhesive side of the film because the oils from your skin will compromise the adhesive qualities of the static cling adhesive.
Features
- Films can be easily cleaned and reapplied after use
- Resists smudges and fingerprints
- Keeps LCD screen free of scratches, dirt, and dust
Compatibility
- This product is compatible with iPhone 3G.
What’s in the box?
- Two precision cut screen films
- Pre-installation film
Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.
This accessory is compatible with the following:
-
iPhone 3GS
-
iPhone 3G
Most Useful Reviews
-
Power Support anti-glare film for iPhone 3G
Great film once again
Written by JW from Lexington
Jul 19, 2008
Basically the same thing as the original iPhone version, completely fingerprint-proof, yet it isn't as clear as the Crystal Film version.
I found it incredibly easy to install by wetting the film before applying, and ended up with no air bubbles at all.
The only downside to the film, as some reviewers stated in the Crystal Film, is that it is a little less than 1mm too short on all sides so it doesn't fully cover the front side, but I haven't found that too be too much of an issue yet. …More588 of 643 people found this useful
Was this useful?
-
Power Support anti-glare film for iPhone 3G
Perfect!
Written by SW from PORTLAND
Jul 19, 2008
I bought this product for my original iPhone, and a year later it still looks "like new". So I'm happy to report that the new anti-glare film for the iPhone 3G seems to be identical ... Power Support knew better than to tamper with perfection.
The key to using this product is to wipe your iPhone with a clean damp cloth then a clean dry cloth (not a paper towel) before applying the film.
Have two pieces of Scotch tape handy when you apply the film ... one to lift the corner of the film and another to gently remove a stray piece of dust from the iPhone, if necessary.
…More564 of 612 people found this useful
Was this useful?
-
Power Support anti-glare film for iPhone 3G
Thinking about it? Just get it!
Written by KW from BROOKLYN
Jul 20, 2008
I wasn't going to get this film until an Apple employee showed me his iPhone. I got it and it's great.
The film is slightly textured to give good feel.
Absolutely no smudges or fingerprints.
Film is very thick, giving protection piece of mind
Absolutely no loss of touch screen sensitivity.
It does "gray" or dull the screen very very slightly. But, it's only noticeable the first 30 mins after it's on; then, you forget about it. …More549 of 595 people found this useful
Was this useful?
Most Recent Reviews
-
Power Support anti-glare film for iPhone 3G
anti glare
Written by TA from trondheim
Nov 24, 2009
the anti-glare film is a bad protector for the screen, because the fotos and films gets a "bad pixel-look" of the glare..
not so good.. …More3 of 4 people found this useful
Was this useful?
-
Power Support anti-glare film for iPhone 3G
Anti glare for iphone
Written by AJ from BEDFORD
Nov 21, 2009
I have tried both the Crystal and the Anti-glare screen protectors. The Anti-Glare is 100% better, fingerprints are no longer visible therfore no need to wipe everytime you use the iphone. The screen is very slightly darker but is not really noticeable. It does not make the image any less vibrant and has no negative affect on any games or videos. All in all a great product and will have to put the Crystal ones in the bin. …More
Was this useful?
-
Power Support anti-glare film for iPhone 3G
INCREDIBLE
Written by BD from Kitchener
Nov 20, 2009
I was at the store worried about products such as this because of adhesives that where on them and if they would ruin my "sensitivity" for my iPhone's touchscreen. However the representative told me everything i wanted to hear.
NO Adhesives and No delayed response time. that is just what i wanted to hear and on top of that you get 2 in one pack these things last for a while and keep your iPhone looking like new you can even take them off and put them on
a new one if you ever upgrade or get an iPod touch or what have you. Great product INCREDIBLE PRICE and they are environmentally friendly Great Product even if it does last only a year which i wont i have a new one and will easily
be willing to pay for a new pack. …More10 of 11 people found this useful
Was this useful?
Questions & Answers
Most Interesting
-
Should I buy the Crystal Film or Anti-Glare Film for my iPhone 3GS? Or I can apply both onto the iphone?
- Asked by GT from Singapore
- Oct 2, 2009
Best Answer
The anti-glare film does what it's supposed to do, but it also changes the way the screen feels. It is slightly textured, so there's a little more friction under your finger. This texture also makes it practically impossible to put a crystal film, or any film for that matter, over it without having a lot of air bubbles. It also defeats the purpose of having an anti-glare film in the first place. if you're thinking of putting an anti-glare film over a crystal film, the only benefit I see would be the extra thick protection. However, you may notice that the phone won't pick up your gestures as well. The crystal film by itself, if applied correctly, just disappears and you hardly even notice that it's there. The feel is pretty much the same as the glass itself. …More
- Answered by KC from San Jose
- Oct 7, 2009
- 20 of 23 people found this useful
- 3 more answers
-
What's the difference between the Anti-Glare Film and the Crystal Film?
- Asked by CA from Surrey
- Oct 20, 2009
Best Answer
Anti-Glare is essentially matte. That means it won't reflect the light. Crystal Film is pretty much the same as your iPhone screen - it's shiny/glossy. …More
- Answered by TU
- Oct 21, 2009
- 19 of 19 people found this useful
-
how many films come with this product ?
- Asked by MH from Nottingham
- Oct 8, 2009
Best Answer
Two.
- Answered by BP from San Francisco
- Oct 8, 2009
- 12 of 14 people found this useful
- 3 more answers
Most Recent
-
Is the crystal film removable or is it permanent?
- Asked by GS from Cameron Park
- Nov 12, 2009
-
if I put a screen protector in my 3gs will this damage the oleophobic film
- Asked by KA from frankston
- Nov 7, 2009
-
is it possible to use the anti-glare film with the intouch slider case?
- Asked by RS from Somerset
- Nov 1, 2009
-
Is protective crystal film available for the original (i.e., NOT 3G) iPhone?
- Asked by JM from SAN FRANCISCO
- Oct 21, 2009
-
How do you clean the Crystal Film? I could not at all. Whenever I try to wash it, it comes out ugly with water spots and lint collects on it.
- Asked by PJ from Cuyahoga Falls
- Oct 20, 2009
-
What's the difference between the Anti-Glare Film and the Crystal Film?
- Asked by CA from Surrey
- Oct 20, 2009
-
Is there a product sold through the Apple Store that provides protection for the back of the iPhone (like the film that protects the screen)?
- Asked by TO from Woodbridge
- Oct 20, 2009
