Power Support Air Jacket for iPhone 3GS
The Power Support Air Jacket protects your iPhone 3GS or 3G while maintaining its elegantly sleek profile.
- Protection from scratches and impacts
- Allows unimpeded use of iPhone 3GS functions
- Nearly weightless to eliminate any added bulk
- Antiglare and Crystal films for maximum versatility
Overview
Designed with your iPhone 3G in mind, the Air Jacket’s hard backing fits snugly to the back of your iPhone for optimal protection and functionality when used with the included films. Virtually “thin as air,” the Air Jacket measures a mere .7mm thick.
Mfr. Part No.: PIA-07E
Note: The Air Jacket and Body Film cannot completely protect an iPhone 3G from all scratches or abrasions. They will not protect it from damage due to collisions or strong impacts. If your Air Jacket gets dirty, simply remove the iPhone 3G from the case and clean the Jacket with a neutral detergent and water. Let the Air Jacket dry completely before putting the iPhone back in it.
Features
- Protection from scratches, dust, and impacts
- Compliments the iPhone 3G design and allows unimpeded use of its functions
- Nearly weightless to eliminate any added bulk
- Antiglare and Crystal Films for maximum versatility in protecting your touch screen
What’s in the Box
- One Air Jacket
- One Crystal Film for LCD protection
- One Antiglare Film for LCD protection
Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service.
This accessory is compatible with the following:
-
iPhone 3GS
-
iPhone 3G
Most Useful Reviews
-
Power Support Air Jacket for iPhone 3GS
Awesome clear case ever!
Written by JC from Seattle
Aug 28, 2008
First of all, it is really thin. It really has a good feel onto it and it really grasps the back so no dirt will ever go in (I tried putting it in my pocket, worked well). Those small circle-like stickers placed at the back on the phone really helps to avoid that mark when the jacket and the case touches, and also follow the instructions on the japanese website, place 5 not just 2 of the stickers: rectangular corners then one in the middle. Like what the box says, this product cannot completely protect the iPhone 3G from all scratches and abrasions - because of it's 0.7mm thickness of course. This is only for people who just places their iPhones on their desks or tabletops, not for those who throws it or occassionally drops their iPhones (ouch why would you drop it?)
Finally my search ended, I used the Griffin Elan Form case first, didn't work because of the leather peeling, swapped it again with another Elan Form case but leather-peeling persists, switched to Incase Slider black matte, didn't work because of some problems encountered taking it off and finally this Air jacket which for sure will be my last case for my own iPhone 3g. It shows its aesthetics, the beautiful apple logo at the back (still not scratched) and of course its color. Definitely worth it! The only thing that bothered me with the packaging is that they never specified which one is the Anti Glare and the Crystal Film, they have 2 films inside but no label I have to contact them just to check which is which, cause I'm using my old anti glare film on my iPhone 3g right now. Some people say the you could fee that the texture for the PS crystal film is smoother & has a clear image compared to the anti-glare (whew finally figured it out!)
Before I end this post, some cons I found.. the air jacket plastic case, you might find some imperfections - like really really small dotlike imperfections which you'll think are dust when they were manufacturing it. I couldn't get it off (sniff) but I only had like two of them so it doesn't bother me, besides the back of my phone is SOOO WHIIITEEE thank you power support!
As you can see in the photos, you won't even notice the case. …More228 of 259 people found this useful
Was this useful?
-
Power Support Air Jacket for iPhone 3GS
Ideal Case for Simplicity
Written by JR from Glendale
Sep 2, 2008
This case is perfect if you want a non-bulky, low profile case for your iPhone. Being a guy, I carry my phone in my pocket and I don't need the extra weight that most other cases add. Plus, the back cover feels slick like the iPhone itself and it won't turn your pocket inside-out every time you pull it out (like other rubbery cases).
It is very form fitting so don't try to use on the old iPhones - it won't fit!
It's just what I wanted. …More181 of 195 people found this useful
Was this useful?
-
Power Support Air Jacket for iPhone 3GS
Air Jacket so lightweight you won't know you're wearing it!
Written by JC from Maldon
Dec 3, 2008
Really like this iphone case for it's streamline feel. I have had hard cases before which really add bulk but the Air Jacket feel much lighter. The hard case which protects the back and sides of the iphone is very thin and you can hardly tell it's there and because it's clear you can still appreciate the beautiful design of the iphone.
I also like the film cover as it protects the screen from scratches and helps reduce finger marks but also gives a smooth feel to the touch screen helping your finger move along it more easily.
You also get transparent adhesive pads to insert between the case and iphone which prevent the case from scratching the phone with any dust that may get stuck in there. …More170 of 186 people found this useful
Was this useful?
Most Recent Reviews
-
Power Support Air Jacket for iPhone 3GS
Nice but It Scratches the Chrome Bezel
Written by SA
Dec 14, 2009
I have two Power Support Air Jackets: Titanium and Clear for my 3GS. OK, I accepted that the fact that the front of the phone wasn't protected same as the top of the chrome bezel. The cases feel sleek and almost as if there's no case at all. The Titanium Air Jacket is a beauty (however $39.95 is absurd).
Now the BIG negative: The air jackets SCRATCH the chrome bezel!!! You fit the iPhone into the case first tilting the left side of the phone first fitting the volume and ringer switch in first. then the other side fits right in as it should. However, the air jacket has ROUGH edges on the inside edges. Removing the case to clean the iPhone (the jacket is NOT air tight) causes those rough edges to SCRATCH the chrome where it makes contact more and more as the case is removed for cleaning (or swapping out with another color) more on the phones right side where it "clicks"in . For $34.95 (clear) and $39.95 (Titanium), Power Support could do a little better with their molding process. It is a sleek, smooth case but be forewarned-it WILL scratch your chrome bezel more than if you had no case at all. …More4 of 5 people found this useful
Was this useful?
-
Power Support Air Jacket for iPhone 3GS
This is great!
Written by MH from Marlow
Nov 14, 2009
Not sure why other people are giving this a bad review, maybe I have a later product version. This is great!
The iPhone is a thing of beauty and the clear version lets you see what you have paid all this money for! No problems with chargers and it absolutely protects the phone unless you throw it across the room - and why would you do that?
I am clumsy and pretty careless. I have had this for over 2 months now and it has served me very well. …More4 of 5 people found this useful
Was this useful?
-
Power Support Air Jacket for iPhone 3GS
Good but caveats
Written by RS from Overland Park
Nov 10, 2009
The films are difficult to get on once you realize to just let the film put itself on. The clear screen has protected the glass pretty well, although it smudges easily. I am now trying the anti-glare screen which does wonders for reducing glare.
I have the clear case. Very thin, very unobtrusive. However, the case gets scratched easily (who cares? It's protecting the iPhone). Since it doesn't protroude forward of the screen bezel don't expect it to protect the screen.
The problem I have with this case is that where the front edge of the plastic meets the chrome of the iPhone, the micromotion of the unit and small dust particles trapped at the interface have rubbed millions of linear scratches in the chrome, even though I remove the unit weekly and clean everything twice with Apple Klear. …More13 of 19 people found this useful
Was this useful?
Questions & Answers
Most Interesting
-
is it really titanium?
- Asked by AN from BARDONIA
- Nov 27, 2009
-
does it protect the screen ?
- Asked by MS from TELFORD
- Nov 16, 2009
-
Does this case cover the seam where the back cover (black or white) meets the silver frame? (I'm concerned about that area) Does the case fit tight?
- Asked by JM from Westminster
- Oct 15, 2009
Best Answer
Hi :)
I actually played with this (the purple one) in an apple store, took it out and tried it on.. i fell in love with it, but didn't have the money to buy it :(
In answer to your question, while loving it i tried to get it off to return it to its case, and a fair bit of force to remove it - so yes i would of said it was a rather tight case
Tom …More- Answered by TA from PORTSMOUTH
- Oct 18, 2009
- 7 of 7 people found this useful
- 3 more answers
Most Recent
-
Can anyone tell me if the Purple or Red shades in thess cases are also Metallic in appearance. Hard to tell from picture??
- Asked by RA from Surrey
- Dec 12, 2009
-
is it better than "Invisible Shield" (which doesn't cover seams and is bulky on the corners)?
- Asked by RH from Oakland
- Nov 28, 2009
-
Can you still dock the phone into a sounddock without removing the cover?
- Asked by RS from Ash Vale
- Nov 21, 2009
