• 1.0 out of 5 stars

    Doesn't work with Samsung TV

    • Written by from Bryn Mawr

    I'm very disappointed with this. I bought a new MacBook last week and got the VGA adapter so I could use it with my TV as I did my old PowerBook G4 (via the Mini-DVI to VGA adapter). The new adapter worked fine when I connected it to an overhead projector, but it doesn't seem to send a readable signal to my Samsung LN40A650 television.

    I tried booting in to Windows via Boot Camp and got the same result.

    I guess I'll have to try the DVI adapter with a converter from DVI to HDMI to use this with my TV. A Mini DisplayPort to HDMI (or even regular DisplayPort, which can be directly converted without using audio) would be ideal, but there doesn't seem to be any sign of that.

    2849 of 4157 people found this useful

  • 4.0 out of 5 stars

    Works perfectly

    • Written by from Richmond

    Output to my 22" Viewsonic is clear and crisp and setup with no effort. Seems to be of the same quality as the mini DVI to VGA adapter which I used everyday for a year with out incident on my old macbook. Should be priced in the 14.99 - 19.99 range.

    1345 of 1657 people found this useful

  • 1.0 out of 5 stars

    Disappointing

    • Written by from Burr Ridge

    I can not get this thing to output to my Samsung LN-4042H 40 inch LCD. The old miniDVI to VGA worked no problem with my old MacBook. I have checked and it is not a TV problem, so certainly something hardware or driver related. Also $29.99 for a video dongle seems steep to me.

    1721 of 2544 people found this useful

  • 4.0 out of 5 stars

    Review, on the road experience & tips on starting up the device

    • Written by from London

    In order to use this you should have a Macbook that has a Mini DisplayPort, always check the model of your Macbook before buying as you can easily end up buying the mini DVI to VGA adapter instead of this or have a mini DVI connector older gen Macbooks.

    In terms of whether it's compatible with projectors and LCD TV, so far I used it on two LCD TVs, both work flawlessly (LG and Samsung). The trick here is MAKE SURE THE MAC BOOK IS OFF/SHUTDOWN, attach the adapter to the Macbook, follow by the VGA connector. Once those are ALL CONNECTED, switch ON your Macbook. The OS will detect the port and enable the external screen normally. It's an IMPORTANT step, if you miss it the screen WILL BE BLANK, trying to click on detect screens in preference probably wont work as well.

    When it works, you might want to switch to mirror mode, you can configure that in the display preference. I use that for presentations as I have to get a view on what I was presenting every now and then in front of me. Best resolution in mirror mode probably is nearer to the 720p (1280 x 720), which is a HD standard resolution, less distortion for what you try to display on the TV/Projector.

    On the technical side, the adapter contains a Digital to Analog signal convertor (that's why it's a bit long, there is a circuit board and ICs in it), which may only be enabled if it detects a screen attached during initial boot up.

    Another note is that there is a mini Displayport to HDMI adapter available on (Check Apple/Amazon). These are digital links which will probably provide better compatibilities or resolution to any HDMI capable HD TV. Some will even allow audio on the TV via adapter.

    My 2 cents is for Apple to provide simple picture/graphical guide for users (on package or at display) or ask Apple store staffs to guide buyers. This can be very frustrating for normal users who isn't aware of the (simple) startup procedures.

    Thanks for reading! Hope it helps :-).




    Cheers,
    Zen

    407 of 416 people found this useful

  • 1.0 out of 5 stars

    Doesn't work with data projectors

    • Written by from London

    This adaptor is very disappointing. I found that it works fine with some small (20 inch) Samsung monitors that have a VGA input but it doesn't work with any of the data projectors I have in my university department so I can't use my new MacBook Pro (unipart aluminium case) for Powerpoint presentations, which was one of the main reasons for buying the laptop. The problem seems to be that the laptop senses the data projector ( and scales down the laptop display to VGA) but the projector doesn't detect the laptop (and so fails to display the image from the laptop screen). My old MacBookPro (Intel core duo) works fine with all data projectors (using the DVI to VGA adaptor) and I'm now in the silly position of having to use the old laptop for all travel (conferences etc) plus teaching in the university. The wonderful looking new MacBook Pro has to stay at home. Apple needs to issue a firmware fix or a better adaptor as soon as possible.

    579 of 775 people found this useful

  • 1.0 out of 5 stars

    Does not work with Samsung TV's, use the DVI adapter instead

    • Written by from WALLINGTON

    This adapter does not work with my Samsung TV/Monitor and many others have said the same thing. If you have a Samsung TV/Monitor, the Mini DisplayPort to DVI Adapter works perfectly

    414 of 599 people found this useful

  • 3.0 out of 5 stars

    Need clearer information

    • Written by from Lancaster

    Why doesn't Apple make it much clearer that this is the kind of adapter needed to connect from a Thunderbolt port to a VGA cable? All this talk of mini this and that is very confusing - I already ordered VID ADPT MINI-DVI to VGA Adapter-GEN by mistake because of this!

    254 of 297 people found this useful

  • 5.0 out of 5 stars

    Thunderbolt to VGA as well!

    • Written by from Renton

    I didn't realize that Mini DisplayPort is backwards compatible with Thunderbolt display technology. In other words, if you have a Thunderbolt-enabled Mac and need to display to a VGA display, this cable will do the trick.

    216 of 221 people found this useful

  • 1.0 out of 5 stars

    Disappointed (and embarrassed)

    • Written by from Parkland

    So I picked up the Mini DisplayPort to VGA Adapter for my new MacBook to give a presentation at work. I was connecting to a Samsung 52" HDTV display. Keep in mind, I've done dozens of presentations on my previous MacBook Pro with the standard DVI to VGA Adapter and it has always worked flawlessly. Well, needless to say, this new Adapter is worthless. I could not get it to work and, from the looks of the other reviews here, I'm not alone.

    Thankfully, my colleague had his PC notebook (running Windows Vista, mind you) and I was able to give my presentation. Unfortunately, I had to convert my Keynote presentation to a PowerPoint presentation so it didn't come out as good. I'm the resident Mac user in the office, so you can imagine there were a lot of PC vs. Mac jokes going on that day.

    I hope Apple Inc. is reading these reviews and will come up with a solution, i.e. firmware update, to get this adapter working. Otherwise, I'm back to using a PC at work. Ugh, I'm cringing at just the thought.

    181 of 201 people found this useful

  • 3.0 out of 5 stars

    samsung and vga

    • Written by

    Appears lots of people are upset with the adapter not working with their samsung. I don't have the adapter but the reason for the "non-working" condition is based on the samsung vga implementation. It appears that samsung needs or wants to see all grounds connected in the vga connection coming into their monitor / tv. In vga land, there are 5 grounds (one for each color, sync signals and a shield / connector ground). IF these grounds are not connected together "in some form", then in my findings, your samsung display will not "highlight" the "pcmode" and as result, nothing will be displayable on the monitor (usually you will get "check cable" message). The reason for the "differences" that people are experiencing in results is that some vga cables are built with the grounds connected, some computers (eg. some PC's) are implemented to switch (connect) their grounds at the output port, and some different adapters (versions) have the grounds "hard-wired" together, some don't (this one?). Not sure why samsung choose their implementation, but these are my recent findings from my efforts to connect two pc and mac to a newly purchased samsung 61 HD TV. The "easiest" way around things (in my opinion) is to get a vga cable with all ground pins and sheath ground connected... if you already have a vga ("non-working") cable, then try buy a short "extension" cable with the described characteristic and use it as an intermediate cable (ie. between the samsung monitor and the "non-working" vga cable). Hope this is understandable and helps.

    155 of 162 people found this useful

  • 5.0 out of 5 stars

    How to make this work.

    • Written by from INDIANAPOLIS

    There is a trick to getting this adapter to work with bigger tv's. I have a 32 inch LCD samsung and my friend has a 42 inch plasma samsung and it worked with both of them. First connect the adapter to the VGA cable, the tv should then recognize there is a pc connected so select the pc input. Then plug the adapter into the mini displayport and enjoy.

    151 of 171 people found this useful

  • 1.0 out of 5 stars

    Very poor

    • Written by from Camberley

    I've got one of these to connect my Macbook Pro to my Samsung TV but as with everyone else, the TV doesn't recognise the output from the laptop. (It works find with my Dell laptop and Windows XP).

    The result is that the adapter is useless.

    257 of 393 people found this useful

  • 1.0 out of 5 stars

    This adapter screwed a major presentation for me today

    • Written by from Stockholm

    Prior to january this year, I had never (10 years) had any problems with getting my Mac to recognize an external display. However, four weeks ago at a MAJOR presentation (research grant funding) my colleague's Macbook air failed to recognize the projector. Thank god we had brought my machine as a backup, and the presentation went fine. Today, the same thing happened to me at an important event. While we didn't lose money, it was _quite_ embarrassing to appear as a 10-year old who doesn't know how to connect a projector, and I had to give my presentation without slides (nobody else had Keynote '09 on a Mac). Apparently there are a number of people claiming this adapter either does not have all ground pins correctly connected, or that it has physical issues that prevents some VGA cables from sliding all the way in.

    This is a major issue right now, since there are no other miniDP->VGA adapters out there. For now, I would not recommend anybody to trust a new Macbook for a critical presentation - the next critical time I will play it safe with Powerpoint, just in case...

    125 of 142 people found this useful

  • 1.0 out of 5 stars

    Poor design..

    • Written by

    I use both pc and mac in my work. I know there are a lot of die hard mac users but I just don't get it. Mac's have always been style before substance for me. I agree with many of the posters. There are certain laptop connections that laptops presenters need. With pc they are there. With mac, oh know, I need another dongle. Buy a new and improved mac laptop. Oh know, I need new dongles because the old ones don't fit the new laptop.

    The new mini displayport indeed does not fit standard vga connections. Why? Poor design... So here is the problem and the solution. It doesn't tighten down because the recessed area around the female connection is not deep enough. If you look at the attempted connection, there is a space between the 2 connectors. That's why the screws don't touch and tighten. To solve this, I bought a cheap 3' vga extension. When I received it, I went to my grinder and carefully shaved the metal sides down as close as I dared so as not to grind the pins. I was then able to get a closer connection. The screws reached and I could tighten the connector down and I never take the extension off. Now when I go to connect to a projector system, I just have 3 extra feet of extension. I never have to fuss with the overpriced, poorly designed but oh so cool looking apple dongle. Who said, 'form follows function'? Apple should take note, listen to your customers and stop changing the peripherals with each new release.

    141 of 176 people found this useful

  • 1.0 out of 5 stars

    does not function with my Mac Mini

    • Written by from philadelphia

    I am at the point of losing hope in making this adaptor work with my mac mini. I would really appreciate it if I could get some help to make better use of the portability of the mac mini and connect it to a projector. By the way, I have two mac minis 2010 and 2011 and I have used other adaptors as well but was always disappointed.. They work fine with DVI but never with VGA.
    Still hoping for some support

    127 of 149 people found this useful

  • 2.0 out of 5 stars

    Stopped working!!!

    • Written by from tulsa

    I had it for a month and it worked fine then it began to short out. It would flicker and then it totally stopped working. I did not even use it often.

    122 of 143 people found this useful

  • 4.0 out of 5 stars

    The Problem with Reviews

    • Written by from Richardson

    The problem with product reviews is most people who submit reviews are those with a problem. This products works fine. Plugged it in and it worked. A product this simple is not usually commented on because there is not much to go wrong. I read a few reviews before I bought it but I had no problems. Does what it is supposed to do.

    136 of 174 people found this useful

  • 1.0 out of 5 stars

    2 Major Problems

    • Written by from Greenwich

    I am surprised that this adapter does not live up to Apple's usual high standard of quality.

    First, one wonders why a $30 device that is essential for almost all Mac Mini users is regarded as an option. It seems to be an underhanded attempt to gouge customers.

    Second, a simple device such as this should be able to attach to a VGA cable correctly. It does not. The thumb screws on my VGA cable are not long enough to reach the corresponding sockets on this Apple adapter. This means that the VGA cable will work itself loose. (When it does get loose, by the way, the Mac Mini somehow forgets the correct resolution of my HP 1440 x 900 display. After hours of trying to reset the resolution, I accidentally stumbled on the cause when I touched this Apple VGA adapter. Now I have to use Scotch tape to hold the cable and adapter together!)

    This is not the level of quality I have come to expect from Apple, and I have tempered my enthusiasm for the company's products accordingly.

    108 of 124 people found this useful

  • 1.0 out of 5 stars

    poor quality

    • Written by from Clinton Township

    It worked fine at first, then one day as I was disconnection it from the MiniDisplay port on my MacBook Pro, the plastic came apart from the wire slightly. It still works but now there are lines across my secondary monitor and when I first plug it in, I have to wiggle the wire around for a minute in order to get the other screen to turn on. If I bump into it on accident, the secondary monitor will lose signal and turn off momentarily.

    Compared to other Apple products, this adapter is very low quality.

    100 of 109 people found this useful

  • 3.0 out of 5 stars

    Its rough being on the leading edge of technology...

    • Written by from Calgary

    I bought this adapter with my new aluminum unibody macbook a couple of weeks ago. I immediately rushed home to try it out with my samsung LN46A550 TV... To my dismay the TV nor the macbook recognized that they were connected to eachother...

    After some hard research and digging i found out that this particular adapter only supports up to a 30" display. For whatever reason, apple made it this way. So i returned my adapter and asked employees at the apple store what was up with only supporting 30" or smaller displays. To my surprise i was told good news and bad news... The good news, theres another adapter coming out for my macbook with mini display port... The bad news is that it is not shipping yet and they dont know when it will start shipping. My guess is it has something to do with signal strength for the display size....

    Either way, I have an awesome new computer and im just gonna have to wait to hook it up to my 46" TV.

    103 of 115 people found this useful